CIM MDM 1000, Руководство оператора

Страница: 20 / 100

2-20 METAL DOT MATRIX REV. 04.2002
2 UNPACKING
OPERATORS MANUAL
Fig. 2.1
2.0 UNPACKING
The machine is delivered in a wooden packing
case. This is due to its dimensions and weight
and avoids the risk of dammage to the machine.
All displacements should be done by a forklift or
therefore always by two persons because the
gross weight is about 100 kg. for version METAL
DOT MATRIX 2000 (METAL DOT MATRIX 1000 90
KG.)
To unpack the machine as shown in figure please
follow the instructions below.
- Remove the four side screws (1) with a 10 mm
wrench [es. UNI 6736] and remove the cover.
- Take the 19 mm fork wrench [es. UNI 6736]
which fixed on top of the machine by an
adhesive band.
- Remove the screws from the bottom of the
case (2) with the 19 mm wrench included in
the package.
- Having removed the screws the machine can
be lifted up and placed on the work table.
This operation should be done with two
persons.
- Once the machine has been finally positioned,
the cellophane can be removed. Open the
envelope which contains the cd of manual
and software and the key for the front cover
- Remove the keyboard and with the above
mentioned key open the front lid and remove
the elastic bands which hold the pincer.
- Please refer to the next paragraph in order to
check all the accessories.
REV. 05-2008