Chino KP 2000 Series, Инструкция по эксплуатации

Страница: 72 / 144

- 69 -
2. RUN In [Key operation] operation
screen, click

key after
clicking

key.
[Operation screen]
・
It is RUN of program operation.
・
It is enabled in RESET status or STOP status.
・
Execute control operation according to the program
pattern.
・
If RUN is executed in RESET status, program operation
starts. If RUN is executed in STOP status, program
operation reopens.
3. STOP In [key operation] operation
screen, click
 key after
clicking  key.
[Operation screen]
・ STOP of program operation.
・ It is enabled in RUN status.
・ If STOP is executed in RUN status, program pattern (SV
and time) is stopped and at that time control operation is
continued using SV (It becomes a constant value
operation).
4. ADV In [key operation] operation
screen click

key after
clicking

key.
[Operation screen]
・
It is advancing (progress) of step.
・
It is enabled in RUN status or STOP status.
・
If ADV operation is done in RUN status, the program
operation continues from the beginning of advance
step. If ADV operation is done in STOP status, the
program operation has STOP status at the beginning of
advance step.
・
In one time ADV operation, progress is by one step
hence perform those many number of ADV operations
for the number of progress steps.
5. PTN In [key operation] operation
screen click

key after
clicking

key.
After that select a number
using,

key

key.
[Operation screen]
・
Select Pattern number.
・
It is enabled in RESET status.
・
Pattern number selection status is obtained in RESET
status by clicking

key after

key.
After that, by using the

key or

key, select the
pattern number for which operation is to be done. At that
time the number selected in No. of PTN is displayed in
upper display window.