Chicago Dryer King Edge, Инструкция по эксплуатации

Страница: 193 / 290

King Edge 3024-016c
C-11
DISCHARGE ADJUSTMENT (FEED)
Adjustment Function Range
(Increment)
Low Range
Select
High Range
Select
Standard
Setting
TENSION TIME
Determines how long the flatwork
is held in the fully spread position
before the air blasts.
.08 - .20 sec
(.04 sec)
Laydown erratic.
Flatwork not
settled before
laydown.
Unit operation is
slower than peak
performance level.
.12 sec
SPREAD ADJUSTMENT (SPR)
Adjustment Function Range
(Increment)
Low Range
Select
High Range
Select
Standard
Setting
SPREAD
DELAY
Determines the delay between
the transfer clamps releasing
flatwork and the spreader clamps
beginning to move.
0 - .06 sec
(.01 sec)
Clamps
move before
flatwork is
released from
transfer clamps.
NA
.05 sec
SPREAD SLO
BUFFER
Sets the distance from the
estimated width of the piece at
which the speed of the spreader
clamps begins to slow.
5.0” - 80”
(1”)
Clamps slam at
center position.
Unit operation is
slower than peak
performance level.
50”
Spreader Adjustments (SPR)
The spread delay and spread slow buffer can
be individually adjusted. When SPR is chosen
from the SELECT ADJUSTMENT menu, the
following displays:
SPREAD DELAY .05 SEC
SPREAD SLO BUFFER 45˝
Refer to the table below for information about
each available function to use as a guide in
making adjustments.
Discharge Adjustments (Feed)
The tension time can be individually adjusted.
When FEED is chosen from the SELECT
ADJUSTMENT menu, the following displays:
TENSION TIME .12S
Refer to the table below for information about
each available function to use as a guide in
making adjustments.