Maintenance
52
Rev. 10/17
Brave 30 ES - Brave 60 ES - Brave 90 ES
6.11 Replacing the water in the tank
1 -
Disconnect the machine from the electricity supply.
2 -
Remove the upper cover.
3 -
Wait until the ice bank has fully melted.
4 -
Draw the water out of the tank, emptying it completely.
5 -
Remove any residues from the inner tank components (do not use pointed or sharp tools to do this).
6 -
Fill the tank with clean water, to about 2cm (1 inch) below the overflow hole.
7 -
Refit the upper cover.
8 -
Reconnect the machine to the electricity supply.
If the machine is to be left unused for a long time, always empty the tank.
CAUTION
Do not put your hands inside the tank if the machine is running.
6.12 Extraordinary maintenance
Extraordinary maintenance procedures are those performed in response to failures or
malfunctions; they may involve the replacement of certain components by authorised, skilled
technical staff.
All extraordinary maintenance interventions must be carried out by CELLI-authorised technical personnel.
