Installation
32
Rev. 10/17
Brave 30 ES - Brave 60 ES - Brave 90 ES
To make the connection to the water system correctly, proceed as follows:
1 -
Connect the machine's water intake to the water supply system, or to a filtering system.
Check there are no leaks in the water circuit.
Inside the machine there is a branch that separates the water to be used for making soda from the water
that will remain still.
2 -
Connect the still water coil outlet and the soda recirculation outlet to the python.
The internal diameter of the water inlet tube must be at least 9,5 mm.
Inlet water pressure must be between 2 and 4 bar (0,2 MPa and 0,4 MPa).
BR0310
ACTIVATED CARBON FILTER
EXAMPLE OF A CONNECTION TO THE WATER SUPPLY VIA THE FILTER
CHECK VALVE
IN COMPLIANCE WITH EN 61770
DRAINAGE (FOR
FILTER ACTIVATION)
DRINKING H
2
O
PRESSURE REDUCER
H
2
O IN
Ø i 9.5mm
