Installation
31
Brave 30 ES- Brave 60 ES - Brave 90 ES
4.5.2 Water intake connection
To facilitate the connections, the inlets and outlets are identified by special adhesives.
Use only food-approved tubes and fittings when connecting the machine to the water supply
system.
The machine must be connected to a drinking water supply line.
To ensure a good flow of water from the dispenser, do not allow the tubes to come into contact
with heat sources, and avoid any restrictions which may obstruct the water flow.
ACTIVATING THE FILTERS
After fitting or replacing the filter, allow the water to flow from the drain tap (just after the
filter) until the water leaving the appliance is free from all cloudiness or sediment. Do not use
any water from the appliance until this has been done.
For filter installation, lifetime and replacement procedure, always comply strictly with the
instructions supplied by the filter manufacturer
.
The filtering system must comply with the relevant local regulations.
BR00170
WATER
INTAKE
BR0210
IN/OUT ADHESIVE
