Installation
33
Brave 30 ES- Brave 60 ES - Brave 90 ES
4.5.3 Connecting the syrup lines
To facilitate the connections, the inlets and outlets are identified by special adhesives.
The connection of the syrup lines differs according to whether the syrup is contained in a bag-in-box or in
stainless steel kegs.
The bag-in-box is a plastic bag in a cardboard box; the syrup is held in the plastic bag.
•
syrup contained in a bag-in-box (BIB):
use pneumatic pumps powered with CO
2
or compressed air
•
syrup contained in steel kegs:
use CO
2
to push the syrup along to the valves
If you use carbon dioxide (CO
2
), be sure to air the room.
4.5.4 Connecting the soda recirculation line
The soda recirculation tubes in the python can be recognised by their larger diameter; they are
usually red (IN soda recirculation) and blue (OUT soda recirculation).
Connect the soda system output and input using the two python tubes with the bigger diameter.
The supply of soda to the dispensing valves takes place directly, via the soda recirculation line.
BR00173
BR0210
SYRUP
INLET
IN/OUT ADHESIVE
