Using the machine
42
Rev. 10/17
Brave 30 ES - Brave 60 ES - Brave 90 ES
5 - Using the machine
5.1 Start-up
1 -
After checking that all the connections
and adjustments are correct, connect the
machine to the electricity supply by inserting
the plug in the nearest suitable socket.
2 -
Press the I/0 switch onto
I
(
A
).
3 -
Wait the length of time needed for the ice bank to
form (about 3 hours), and for the cooling unit to get up
to its optimum working speed.
At this point, you can dispense water or drinks.
5.2 Stopping the machine
REGULAR STOPS
If the machine is to be left unused for a medium-long period, disconnect the plug from the
electricity mains.
Disconnect the machine from electricity sources and protect from heat and bad weather. Cover
it so that dust and/or splashes of any kind cannot damage it.
Turn off the water supply and the valve of the CO
2
cylinder.
Remove the syrup containers connections, and wash them.
If the machine needs to be shipped, stored or moved, the circuit must be sanitised (see 6.8
- "Sanitising the dispenser").
All the water must be removed; very low temperatures might freeze any residues of sanitiser
solution or water, which are hazardous since they may damage internal components.
If the machine is out of order due to a fault or maintenance, or for any other reason, you are advised to inform
everyone of this fact by affixing a sign.
Make sure the syrup tanks respect the conditions indicated by their suppliers, so the specific characteristics
of the product stored inside are not jeopardised (check the conditions for proper conservation, and the expiry
dates on the products).
BR0200
A
