Carrier TruVu MPC, Руководство по установке и запуску

Страница: 65 / 67

Document revision history
TruVu™ MPC Processor CARRIER CORPORATION ©2021
Installation and Start-up Guide All rights reserved
61
Important changes to this document are listed below. Minor changes such as typographical or formatting errors are not
listed.
Date Topic Change description Code*
9/20/21 Specifications Changed Real time clock specification to "up to 3 days" from "at
least 3 days". Changed EU RoHS compliance code. X-PM-BM-O
To attach I/O expanders > TruVu MPC
I/O expander configurations Added details about the expander returning to an unconfigured
state X-TS-RB-E-BM
6/11/21 Touchscreen Devices Added Ethernet port as a method of connecting the TV-MPCXP to
touchscreen devices X-PM-JD-E
Specifications Added statement that Service Port connects through a local
connection to a computer or connects to the TruVu™ ET Display
What is the TruVu™ MPC Processor? Added statement that Ethernet Service Port connects locally to
controller setup pages and the TruV
u™ ET Display
To communicate through the
BACnet/IP Service Port network Removed statement that you can access your network using a
touchscreen connected to the Service Port. Updated procedure
for connecting to BACnet/IP Service Port for i-Vu® v8.0 interface
X-PM-BM-E
2/18/21 Configuring BACnet Device Instance
and network number Changed BACnet Device Instance Number formula to (IP network
number x 100) + rotary switch address C-TS-OC-E
Specifications Changed Real Time Clock spec to "at least 3 days" from "up to 3
days" X-PM-BM-E
4/29/20 Wiring for communications Port S1/S2 baud rate for Modbus changed from 1.2 to 115.2
kpbs to 9.6 to 115.2 kbps X-D
To set up the controller through the
Service Port > BACnet tab Added autobaud information. X-PM-KC-O
Addressing the TV-MPCXP > To set the
Port S2 address and baud rate Added autobaud information.
Addressing the TV-MPCXP > To set the
Port S1 address and baud rate Added autobaud information.
Addressing the TV-MPCXP > To set up
autobaud New topic
To set up the controller through the
Service Port > Device Port Added Data Backup and Restore.
To communicate through the
BACnet/IP Service Port network New topic
To set up the controller through the
Service Port Added ability to access i-Vu® application or a touchscreen
device through BACnet/IP Service Port.
Corrected the static IP address settings.
What is the TruVu MPC Processor? Added BACnet/IP Service Port to the ports table.
To get the TV-MPCXP's serial number A sticker is on the top of the controller and there is a laser-
etched number and QR code on the inside circuit board. X-D
10/1/19 Configuring BACnet Device Instance
and network number Changed Port S1 MSTP MAC Address and Port S1 ARCNET
Address from fixed to user configurable X-PM-KC-O
Specifications Updated BTL to Revision 14
6/3/19 To attach TruVu MPC I/O expanders Changed total wire length for the IO bus from 2000 feet to 1000
feet X-H-RD-E-TA
4/12/19 I/O Bus and Xnet Expanders Changed description of Status > Error: Calibration X-TS-RD-E
* For internal use only
Document revision history