Canworld 4T075G/090L, Руководство пользователя

Страница: 60 / 267

CDE360 Vector Control AC Drive Chapter 5 Parameter List Table
-
47
-
Function
Code
Name Range Default Step Description
A0.18 FI frequency 0.00~100.00 0.00 0.01kHz Display the X6/FI frequency
A0.19 FO frequency 0.00~100.00 0.00 0.01kHz Display the Y2/FO high speed
pulse output frequency
A0.20 PID reference 0.0~100.0 0.0 0.1% Its unit and decimal are
depended on engineering unit.
A0.21 PID feedback 0.0~100.0 0.0 0.1%
A0.22 PID deviation -100.0~100.0 0.0 0.1%
A0.23 PID output -100.0~100.0 0.0 0.1%
A0.24 PLC stage 0~15 0 1
A0.25 Pulse counter 0~65535 0 1
A0.26 Actual length 0~65535 0 1m Dividing the number of pulses
by E7.08.
A0.27 Linear speed 0.0~6553.5 0.0 0.1m/Min This parameter shows the
linear speed and its unit is
m/Min
A0.28 Remaining time 0.0~6553.5 0.0 0.1Min This parameters will show the
remaining time when the
timing function is enabled.
A0.29 Swing center
frequency
0.00~b0.00 0.00 0.01Hz It is decided by the current
frequency source. And it
shows the center frequency of
swing frequency function.
A0.30 Load speed 0~65535 0 1 Output frequency multiplied by
H0.08 .
A0.31 Feedback speed 0~b0.00 0.00 0.01Hz Showing the actual output
frequency.
A0.32 Multi pump
status word
0000~4444 0000 1 This parameter is used to
indicate the status of each
motor in multi-pump operation
process.
0: in interlock or not used
1: ready
2: wait for switching
3: connect to power grid
4: connect to AC drive
Unit's digit:: 1# pump status
Ten's digit:: 2# pump status
Hundred's digit:: 3# pump status
Thousand's digit: 4# pump status