Canon P 400, Руководство по обслуживанию

Страница: 81 / 88

Symptom Possible cause Suggested action
Color quality is not
consistent Problem with the printer Test the printer and service, if necessary (see the service docu-
mentation that accompanies the printer).
File or application problem 1. Print a different color test page from another application.
2. If the quality of the test page is good, there may be a file or
application problem.
Out of calibration or calibration information/
curves on the active partition are corrupted 1. If you suspect that a custom calibration setting is causing the
problem, reset the calibration setting to its default measure-
ments:
In Command WorkStation > Device Center > General > Tools,
click Manage.
Calibrator opens.
In Calibrator, select the calibration setting that you suspect is
causing the problem, and then click View Measurements.
Click Reset to Default Measurements, and then click Yes to
confirm.
If resetting to default calibration does not solve the problem,
you may need to service the printer.
2. If restoring default measurements fixes the color quality, the
custom calibration may have been the cause of the problem.
Request that the site administrator recalibrate the
imagePRESS
Server . For details, see Color Printing, which is part of the
user documentation set.
3. If the problem persists after recalibration, the calibration infor-
mation on the hard disk drive may be corrupt. Reinstall system
software.
4. If the problem persists, the hard disk drive may be corrupt.
Verify that all hard disk drive cabling is correct.
5. If hard disk drive cabling is correct, you may need to replace
the hard disk drive.
Print quality is poor Missing or outdated printer description file Make sure that the appropriate printer description file is installed.
For information about printer files, see Printing, which is part of the
user documentation set.
Application cannot find the appropriate print-
er description file
Problem with the printer
Test the printer and service, if necessary (see the service docu-
mentation that accompanies the printer).
Out of calibration or calibration information/
curves on the active partition are corrupted 1. If you suspect that a custom calibration setting is causing the
problem, reset the calibration setting to its default measure-
ments:
In Command WorkStation > Device Center > General > Tools,
click Manage.
Calibrator opens.
In Calibrator, select the calibration setting that you suspect is
causing the problem, and then click View Measurements.
Click Reset to Default Measurements, and then click Yes to
confirm.
If resetting to default calibration does not solve the problem,
you may need to service the printer.
2. If restoring default measurements fixes the color quality, the
custom calibration may have been the cause of the problem.
Request that the site administrator recalibrate the
imagePRESS
Server
. For details, see Color Printing, which is part of the
user documentation set.
3. If the problem persists after recalibration, the calibration infor-
mation on the hard disk drive may be corrupt. Reinstall system
software.
4. If the problem persists, the hard disk drive may be corrupt.
Verify that all hard disk drive cabling is correct.
5. If hard disk drive cabling is correct, you may need to replace
the hard disk drive.
Pages come out
blank, or tinted with
green or some other
color Loose cable connection between the im-
agePRESS Server and the printer
1. Check again the printer interface cable and connection at the
imagePRESS Server and the printer.
2. Power off/on the printer.
3. Replace the printer interface cable.
Problem with the printer Test the printer and service, if necessary (see the service docu-
mentation that accompanies the printer).
5. TROUBLESHOOTING
75