Canon iR3245, Руководство по обслуживанию

Страница: 617 / 746

Chapter 17
17-119
MEAP-DSP 2 Title Setting to prohibit screen display switching from MEAP screen to standard screen
Purpose of use, When used Prohibit the switching of the screen display from the MEAP screen to the standard screen (COPY/
SEND/BOX screen, etc.).
Precautions for use -
Settings and adjustment
ranges 0: Switching enabled (the display can transfer to the standard screen)
1: Switching disabled (the display cannot transfer to the standard screen)
Unit -
Value at time of shipment
from factory/Value
established when RAM is
cleared 0
Setting, adjustment and
operation procedures 1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and
notes Even when '1' is set, the display will transfer to the standard screen when an error, jam or alarm has
occurred.
ANIM-SW 2 Title Setting to prohibit switching of display to error or jam screen while the MEAP application is running
Purpose of use, When used Prohibit the switching of the display to the error or jam screen while the MEAP application is running
Precautions for use -
Settings and adjustment
ranges 0: Switching enabled (the warning screen is displayed)
1: Switching disabled (the warning screen is not displayed)
Unit -
Value at time of shipment
from factory/Value
established when RAM is
cleared 0
Setting, adjustment and
operation procedures 1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
Related service modes COPIER > OPTION > BODY > MEAP-DSP (Level 2)
Additional description and
notes Even when COPIER > OPTION > BODY > MEAP-DSP is set to '1', the display will transfer to the
standard screen to display the warning screen if an error, jam or alarm has occurred. When this item is
set to '1' and then an error, jam and alarm has occurred:
- Screen transfer to the standard screen will be prohibited.
- A warning display urging the user to contact the service engineer in charge appears on the MEAP
screen.
BASE-SW 1 Title Switching from MEAP-Full model to Base model
Purpose of use, When used This item is used when trouble caused by the MEAP application has occurred. Switch from the MEAP-
Full model to the Base model.
Precautions for use -
Settings and adjustment
ranges 0: OFF (Base model)
1: ON (Full model)
Set to '0' when restricting to the operation of the MEAP application for the purposes of trouble
analysis.
Unit -
Value at time of shipment
from factory/Value
established when RAM is
cleared 1
Setting, adjustment and
operation procedures 1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and
notes The setting of this item can be changed only from '1' to '0'.
MEAP-SSL 2 Title Setting of HTTPS port for MEAP
Purpose of use, When used Set the port of the HTTPS server when SSL is used by HTTP of MEAP.
Precautions for use -
Settings and adjustment
ranges 0 to 65535
Unit -
Value at time of shipment
from factory/Value
established when RAM is
cleared 8443
Setting, adjustment and
operation procedures 1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and
notes -
COPIER > OPTION > BODY
The value which has been set takes effect after the main power switch has been turned OFF and back ON.
Item Level Description