Canon iR3245, Руководство по обслуживанию

Страница: 610 / 746

Chapter 17
17-112
T-17-54
COPIER > OPTION > BODY
The value which has been set takes effect after the main power switch has been turned OFF and back ON.
Item Level Description
NEGA-GST 2 Title Setting for addition of pre-exposure sequence
Purpose of use, When used This item is used when a drum negative ghost occurs. Pre-exposure operation is performed by laser at
initial rotation or between sheets.
Precautions for use The operation is performed at the following timing between sheets.
Plain paper: Consecutive 32 prints (A4-based conversion)
Thick paper, special paper: Consecutive 16 prints (A4-based conversion)
Settings and adjustment
ranges 0: OFF
1: Pre-exposure operation is performed at initial multiple rotations.
2: Pre-exposure operation is performed at initial multiple rotations and between sheets.
Unit -
Value at time of shipment
from factory/Value
established when RAM is
cleared 0
Setting, adjustment and
operation procedures 1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and
notes -
FTPTXPN 2 Title Setting of the SEND destination port (FTP) number
Purpose of use, When used Set the SEND destination port (FTP) number.
Precautions for use -
Settings and adjustment
ranges 0 to 65535
Unit -
Value at time of shipment
from factory/Value
established when RAM is
cleared 21
Setting, adjustment and
operation procedures 1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and
notes -
NW-SPEED 2 Title Selection of the data transfer speed for service network connection
Purpose of use, When used Select the data transfer speed for service network connection.
Precautions for use -
Settings and adjustment
ranges 0: Automatic
1: 100Base-TX
2: 10Base-T
Unit -
Value at time of shipment
from factory/Value
established when RAM is
cleared 0
Setting, adjustment and
operation procedures 1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and
notes -
STS-PORT 2 Title ON/OFF setting of the T.O.T. synchronous type status communication port
Purpose of use, When used This item is used when Service NAVI is used. To turn ON/OFF the Inquiry/Response (synchronous)
type status communication port in T.O.T.
Precautions for use -
Settings and adjustment
ranges 0: OFF
1: ON
When Service NAVI is used, set to "1" to connect the PC and machine using a crossover cable.
Unit -
Value at time of shipment
from factory/Value
established when RAM is
cleared 0
Setting, adjustment and
operation procedures 1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
Related service modes COPIER > OPTION > BODY > CMD-PORT (Level 2)
Additional description and
notes T.O.T(TUIF over TCP)
A communication protocol (Canon's own protocol) which is used for the presentation (UI) of built-in
applications and for communication with applications inside the machine such as COPY/SEND/BOX.