manualshive.com logo in svg

Canon iR3245, Руководство по обслуживанию

Canon iR3245 - это многофункциональный офисный принтер, который обеспечивает высокое качество печати. Для обслуживания и ремонта устройства рекомендуется использовать Service Manual, который можно бесплатно скачать на manualshive.com. Удобное и надежное решение для вашего офиса.

Поделиться
Скачать
background image

Chapter 16  

16-8

T-16-6

16.1.7 Detail in E602

0019-7493

iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N

<E602-XXYY>

XX= "00"

Code

Cause

Remedy

E602

There is an error on the hard disk.

0001 [Cause] An HDD detection error has occurred. The HDD cannot be 

detected. The HDD does not become ready. The HDD returns an 
error.

[Detection] while boot ROM is in session
BARSAC startup, mounting
(usrIde)

[Timing of Detection] once at startup

See the details under 602.

0002 [Cause] There is no startup file. The program for the main CPU does 

not exist on the HDD or in BOOTDEV/BOOT, and so on.

[Detection] while boot ROM is in use
at time of system file loading (usrIde)

[Timing of Detection] once at startup

See the details under 602.

0003 [Cause] An HDD write abort error has occurred. The sectors for 

BOOTDEV on the HDD cannot be read.

[Detection] BARSAC (all; at time of bootable startup)

[Timing of Detection] once at startup

See the details under 602.

0006 [Cause] A subbootable that matches the PDL type does not exit in 

BOOTDEV/BOOT.

[Detection] during loading of sub boot in oclibroot

[Timing of Detection] once at bootable startup

See the details under 602.

0009 [Cause] there is no necessary FONT file in /BOOTDEV/BOOT.

[Location to be detected] each point
[Detection timing] detected when executing report print, X/IFAX 
communication, stamp print

1. Download SYSTEM again.
2. Check that the font file is located in /BOOTDEV/BOOT.

0012 [Cause] damage/deletion of file on HDD referred by WEB browser

[Location to be detected] initialization of web browser
[Detection timing] Archive cannot be found in /BOOTDEV/BROWS 
by reextracting (reloading) web browser's file when failed to extract 
(load) web browser's file in /APL_GEN/NetFront. 

Reinstall WEB browser contents using download tool.
(If failed to recover, replace HDD because HDD could have been 
damaged)

2000 Error in authentication between the host machine and encryption 

board

- Check connection of encryption board (turn OFF and then ON the 
power)
- Use SST to execute key clear of the encryption board (HDD needs 
to be formatted because HDD is not formatted. System firmware 
needs to be reinstalled)

2001 Mismatch in the operation of encryption board

- Use SST to execute key clear of the encryption board (HDD needs 
to be formatted because HDD is not formatted. System firmware 
needs to be reinstalled)

2002 Fault in the encryption board, etc.

- Check connection of the encryption board (turn OFF and then ON 
the power)
-Use SST to execute key clear of the encryption board (HDD needs 
to be formatted because HDD is not formatted. System firmware 
needs to be reinstalled)
-After replacing the encryption board, format HDD and reinstall 
SYSTEM using SST.
-Replace the main controller PCB.

01XX /DOSDEV is faulty.

See the details under 602.

02XX /FSTDEV is faulty.

See the details under 602.

03XX /DOSDEV2 is faulty.

See the details under 602.

04XX /FSTPDEV is faulty.

See the details under 602.

05XX /DOSDEV3 is faulty.

See the details under 602.

06XX /PDLDEV is faulty.

See the details under 602.

07XX /DOSDEV4 is faulty.

See the details under 602.

08XX /BOOTDEV is faulty.

See the details under 602.

09XX /DOSDEV5 is faulty.

See the details under 602.

10XX Abnormal /APL_MEAP

See the details under 602.

11XX Abnormal /APL_SEND

See the details under 602.

12XX Abnormal /APL_KEEP

See the details under 602.

13XX Abnormal /APL_LOG

See the details under 602.

FFXX There is an error in a partition that cannot be identified.

See the details under 602.

Содержание iR3245











































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для iR3245

Brother DCP 385C - Color Inkjet - All-in-One User Manual preview
DCP 385C - Color Inkjet - All-in-One
Бренд: Brother Страницы: 256
Brother DCP 385C - Color Inkjet - All-in-One Service Manual preview
DCP 385C - Color Inkjet - All-in-One
Бренд: Brother Страницы: 529
Xerox WorkCentre 5638 Quick Start Manual preview
WorkCentre 5638
Бренд: Xerox Страницы: 10
Xerox DocuColor 3535 Color Manual preview
DocuColor 3535
Бренд: Xerox Страницы: 108
Olivetti Copia 9021 Instructions Manual preview
Copia 9021
Бренд: Olivetti Страницы: 50
Canon PC860 Operator'S Manual preview
PC860
Бренд: Canon Страницы: 58
Canon NP6621 Service Manual preview
NP6621
Бренд: Canon Страницы: 340
Canon NP6330 Service Manual preview
NP6330
Бренд: Canon Страницы: 535
Canon NP6330 Service Handbook preview
NP6330
Бренд: Canon Страницы: 140
Canon NP7160 Service Manual preview
NP7160
Бренд: Canon Страницы: 394
Canon oce 31x5e Daily Maintenance preview
oce 31x5e
Бренд: Canon Страницы: 137
Canon NP6621 Service Handbook preview
NP6621
Бренд: Canon Страницы: 146
Canon NP6551 Operator'S Manual preview
NP6551
Бренд: Canon Страницы: 228
Canon PC800 Series Service Manual preview
PC800 Series
Бренд: Canon Страницы: 393
Canon Vizcam 1000 User Manual preview
Vizcam 1000
Бренд: Canon Страницы: 278
Canon PC800 Series Service Handbook preview
PC800 Series
Бренд: Canon Страницы: 88
Xerox XC353 User Manual preview
XC353
Бренд: Xerox Страницы: 39
Xerox DocuColor 5750 Reference Manual preview
DocuColor 5750
Бренд: Xerox Страницы: 7

Бренды по названию

Популярные бренды

Загрузить еще бренды