Canon iR3245, Руководство по обслуживанию

Страница: 603 / 746

Chapter 17
17-105
TEMPCON2 1 Title Switching of the fixing temperature mode (for plain paper, manual feed tray)
Purpose of use, When used Switch the fixing temperature mode when plain paper is fed from the manual feed tray.
Precautions for use -
Settings and adjustment
ranges 0: OFF
1: Priority is given to productivity. The controlled temperature is fixed at -10degC.
2: The controlled temperature is fixed at -6degC.
3: The controlled temperature is fixed at -3degC.
4: Priority is given to fixing performance. The controlled temperature is fixed at +3degC.
5: The controlled temperature is fixed at +6degC.
6: The controlled temperature is fixed at +10degC.
7: The controlled temperature is fixed at +15degC.
Unit -
Value at time of shipment
from factory/Value
established when RAM is
cleared 0
Setting, adjustment and
operation procedures 1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
Related service modes COPIER > OPTION > BODY > FIX-TEMP (Level 1)
Additional description and
notes This item can be used with the setting of FIX-TEMP.
Example)
When "FIX-TEMP=-6degC, TEMPCON2=-6degC" is set, the controlled temperature is offset at -
12degC.
SENS-CNF 2 Title Setting of the document detection sensor placement
Purpose of use This item is used when the RAM contents on the reader controller PCB have been cleared or after the
PCB has been replaced. The setting of document detection size is selected in accordance with the
document sensor placement.
Purpose of use, When used -
Settings and adjustment
ranges 0: AB type
1: Inch type
2: A type
Unit -
Value at time of shipment
from factory/Value
established when RAM is
cleared Varies depending on the destination / 0
Setting, adjustment and
operation procedures 1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
In the case of machines destined for inch or A type manufacturers, be sure to set "1" (Inch type) or "2"
(A type) after the RAM contents on the reader controller PCB have been cleared or after the PCB has
been replaced.
Related service modes -
Additional description and
notes -
CONFIG 1 Title Switching of country/region, language, destination and paper size type
Purpose of use, When used Select the multiple system software applications on the hard disk, and switch the country/region,
language, destination and paper size type.
Precautions for use -
Settings and adjustment
ranges XXYYZZAA
XX: Country/region (example: JP = Japan)
YY (*): Language (example: ja = Japanese)
ZZ (*): Destination (example: 00 = CANON)
AA: Paper size type (00 = AB type, 01 = Inch type, 02 = A type, 03 = Inch/AB type)
* The setting cannot be changed.
Unit -
Value at time of shipment
from factory/Value
established when RAM is
cleared Varies depending on the destination.
Setting, adjustment and
operation procedures 1) Select <CONFIG>.
2) Select the desired item.
3) Press the +/- keys. Each time one of the keys is pressed, the setting is switched.
4) Display the desired setting, and press the OK key.
5) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and
notes -
COPIER > OPTION > BODY
The value which has been set takes effect after the main power switch has been turned OFF and back ON.
Item Level Description