Canon iR C3380 series, Руководство по обслуживанию

Страница: 222 / 610

Chapter 7
7-12
UN16: color displacement sensor A (also serves as patch image sensor)
UN15: color displacement sensor B
7.3.2 Timing of Image Stabilization Control
0013-8483
/ / / / iR C3380i / iR C3380 / iR C2880i / iR C2880
The items that are executed as part of image stabilization control differ depending on the condition of the machine (environment or deterioration of parts associated
with the image formation system). The following table shows the items:
T-7-11
*1: The down-time interval includes the time during which the drum unit rotates idly (10 sec).
*2: This item is executed when the ongoing sleep state lasts more than 8 hr (otherwise, nothing will take place).
*3: At times, ATR control and color displacement may be executed by interrupting the ongoing print job.
MEMO:
- When the user mode "auto gradation adjustment $ full adjustment" is selected, PASCAL control, D-half control and ARCDAT control are implemented in this
order to adjust the image gradation density (full adjustment).
- When the user mode "auto gradation adjustment $ quick adjustment" is selected, D-half control and ARCDAT control are implemented in this order to adjust
image gradation density (quick adjustment).
7.3.3 Drum Film Thickness Detection
0013-8484
/ / / / iR C3380i / iR C3380 / iR C2880i / iR C2880
To form an optimum image against the possible wear on the photosensitive drum, the machine checks the thickness of the drum film. The check is made for every
drum (color), and the result is recorded in EEPROM of the DC controller.
The DC controller is referred when this data detects the primary charging AC bias, the primary transfer bias, and the ATR control target value.
1. Start-Up Timing
at power-on, when closing/opening the front cover, at time of printing
2. Particulars of Control
The DC controller goes through the following to detect the thickness of the drum film:
1) computes the drum count based on "length of time during which the photosensitive drum has rotated" and "length of time during which the primary charging AC
bias is applied."
2) adds the count obtained in 1 above to the count stored in EEPROM.
3) identifies the count as indicating any of the following 3 in terms of the drum film thickness detection data based on the latest count obtained in 2 above: initial
condition, normal condition, final condition.
4) in the event of there being a difference as the result of comparison of the latest drum film thickness data against the stored drum film thickness data, the new data
is written over the existing data; in the absence of a difference, on the other hand, no write operation will take place and the new data will be discarded.
[3]Color Dmax control determines the best level of laser power
[4]Black Dmax control determines the best level of developing bias
[5]PASCAL control determines the best gradation table
[6]Dhalf control determines the best gradation table
[7]Abridged Dhalf control determines the best gradation table (abridged)
[8]Color displacement correction control determines the correction value of color displacement
[9]ATVC control determines the best level of transfer bias
Condition
Items
Down-time
(Max) Drum film
thickness
detection ATR control Color D-max
control
Black D-max
control PASCAL
control D-half
control Abridged D-
half control Color
displacemen
t control ATVC
control
Power-on 22 sec
(approx.)
Yes Yes Yes Yes
Drum unit replacement
(w/ new) 215 sec
(approx.) *1
Yes Yes Yes Yes Yes Yes Yes
Return from sleep state
*2 22 sec
(approx.)
Yes Yes Yes Yes
Initial rotation 10 sec
(approx.)
Yes Yes Yes
Printing *3 15 sec
(approx.)
Yes Yes Yes
Post-rotation 55 sec
(approx.)
Yes Yes Yes Yes Yes Yes
When user-specific
calibration is performed
(full correction) 100 sec
(approx.)
Yes Yes Yes Yes Yes
When user-specific
calibration is performed
(quick correction) 55 sec
(approx.)
Yes Yes Yes Yes
Item Description