manualshive.com logo in svg

Canon imageRUNNER ADVANCE C3325 Series, Руководство по обслуживанию

Принтер Canon imageRUNNER ADVANCE серии C3325 - это высококачественное устройство для офиса, обеспечивающее быструю и эффективную печать. Для получения сервисного руководства на русском языке бесплатно, вы можете скачать его с manualshive.com. Узнайте больше о функционале этого принтера, ознакомившись с руководством.

Поделиться
Скачать
background image

2

2

2-125

2-125

Technical Explanation > MEAP > Maintenance > Using USB Devices

Technical Explanation > MEAP > Maintenance > Using USB Devices

Specifications for the use of USB keyboards

Characters that could be entered on the software keyboard displayed on the conventional 
control panel can be entered using a USB connected keyboard.
•  When the software keyboard window is displayed, characters can be entered from the USB 

keyboard (in-line entry not possible).

•  When the software keyboard window is not displayed, entered characters will not be 

remembered.

•  The characters, which can be entered from a USB keyboard, is only a character, which can 

be entered from the software keyboard.

•  Even if characters are entered from the USB keyboard, the software keyboard window will 

not change (the corresponding key does not invert or change color).

•  Input from the USB keyboard can be accepted at the same time as input from the software 

keyboard or numeric keys.

•  Since the device supports Plug and Play, the USB keyboard can be disconnected/ 

connected freely. However, do not disconnect and connect during in deep sleep (when 
in sleep with setting "low" at "the power consumption in sleep"). It is out of an operation 
guarantee to disconnect and connect the USB keyboard in deep sleep.

•  When USB device is attached to device, devices do not shift to deep sleep mode.
•  Keyboard layout changes according to the keyboard layout settings in the Settings/

Registration screen. In addition, function keys and ten keys which are not displayed in the 
software keyboard cannot be used. (Keyboard which the operation check was conducted 
is 84-key Keyboard, but this does not mean that the operation of all 84-key Keyboards is 
guaranteed.)

Note:

The factory shipment default setting is to enable the use of native (main unit 

functionality) USB keyboards. Therefore, in order to use MEAP application keyboards, 

[Use MEAP driver for USB input device] in [Settings/Registration] needs to be set to ON 

(factory shipment setting is OFF).

Operations change as described below in accordance with ON/ OFF settings.

ON: when using MEAP application keyboard

OFF: when using native (main unit functionality) keyboard (factory shipment default)

 

●

Initialization of MEAP driver priority registration

When any trouble occurs regarding USB driver settings and it is necessary to reset the setting 
information, you can reset the MEAP driver preference registration by using service mode.

Steps to initialize preference use registration

1) Execute the following service mode.

•  COPIER > Function > CLEAR > USBM

2) Restart this device.

 

●

USB Device report print

To check the vendor IDs (idVendor) and the product IDs (idProduct) registered in this device 
by means of declaration in Manifest file of MEAP applications, output the USB Device repot 
report print.

Steps to output the USB Device report print

1) Execute the following service mode.

•  COPIER > Function > MISC-P > USBH-PRT

2) When [OK] is shown on the status field, the status print is output. Check the contents of the 

print.

Example of output result

********************************

*** USB Device report print ***

********************************

USB device information

T: Bus=01 Lev=02 Prnt=03 Port=01 Cnt=01 Dev#= 5 Spd=480 MxCh= 0

D: Ver=2.00 Cls=00(>ifc) Sub=00 Prot=00 MxPS=64 #Cfgs= 1

P: Vendor=066f ProdID=4210 Rev=10.02

S: Manifacturer=SigmaTel, Inc.

S: Product=STIr42xx

S: SerialNumber=0002F0F7261287A5

C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA

I: If#= 0 Alt= 0 #EPs= 2 Cls=fe(app.) Sub=02 Prot=00 Driver=irda-usb

E: Ad=81(I) Atr=02(Bulk) MxPS=512 Ivl=0ms

E: Ad=01(O) Atr=02(Bulk) MxPS=512 Ivl=0ms

F-2-172

Содержание imageRUNNER ADVANCE C3325 Series
























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для imageRUNNER ADVANCE C3325 Series

Canon imageCLASS Mf6160dw Getting Started Manual preview
imageCLASS Mf6160dw
Бренд: Canon Страницы: 64
Canon imageCLASS MF6500 Series Advanced Manual preview
imageCLASS MF6500 Series
Бренд: Canon Страницы: 132
Canon imageCLASS MF5550 Software Manual preview
imageCLASS MF5550
Бренд: Canon Страницы: 120
Canon imageCLASS MF5630 User Manual preview
imageCLASS MF5630
Бренд: Canon Страницы: 85
Canon imageCLASS MF5550 Basic Manual preview
imageCLASS MF5550
Бренд: Canon Страницы: 136
Canon IMAGECLASS MF7400 Starter Manual preview
IMAGECLASS MF7400
Бренд: Canon Страницы: 40
Canon imageCLASS MF5850dn Settings Manual preview
imageCLASS MF5850dn
Бренд: Canon Страницы: 34
Canon imageCLASS MF6500 Series Starter Manual preview
imageCLASS MF6500 Series
Бренд: Canon Страницы: 16
Canon imageCLASS MF6540 Software Manual preview
imageCLASS MF6540
Бренд: Canon Страницы: 82
Canon imageCLASS MF5550 Facsimile Manual preview
imageCLASS MF5550
Бренд: Canon Страницы: 99
Canon imageCLASS MF5630 Quick Reference Manual preview
imageCLASS MF5630
Бренд: Canon Страницы: 24
Canon imageCLASS MF5770 Setup Sheet preview
imageCLASS MF5770
Бренд: Canon Страницы: 2
Canon imagePRESS C7000VP Series Customer Expectation Document preview
imagePRESS C7000VP Series
Бренд: Canon Страницы: 48
Canon imageClass MF5650 Parts Catalog preview
imageClass MF5650
Бренд: Canon Страницы: 40
Canon imageCLASS MF5770 User Manual preview
imageCLASS MF5770
Бренд: Canon Страницы: 8
Canon imageCLASS MF4880dw Starter Manual preview
imageCLASS MF4880dw
Бренд: Canon Страницы: 36
Canon imageCLASS MF4890dw Basic Operation Manual preview
imageCLASS MF4890dw
Бренд: Canon Страницы: 116
Canon ImageCLASS MF4690 Reference Manual preview
ImageCLASS MF4690
Бренд: Canon Страницы: 387

Бренды по названию

Популярные бренды

Загрузить еще бренды