manualshive.com logo in svg

Canon imageRUNNER ADVANCE C3325 Series, Руководство по обслуживанию, Страница: 135 / 951

Поделиться
Скачать
Canon imageRUNNER ADVANCE C3325 Series Скачать руководство пользователя страница 135

2

2

2-99

2-99

Technical Explanation > MEAP > Login Service and User Authentication Method > User Authentication (UA)

Technical Explanation > MEAP > Login Service and User Authentication Method > User Authentication (UA)

 

●

User Management with Server Authentication

The environment required for using a server to authenticate users with User Authentication is 
indicated below.
The system requirements differ according to the authentication server.
The system requirements for using each authentication server are indicated below.

Active Directory authentication

With Active Directory authentication, the following servers are required, and servers 
constructed in the following system environment are supported.

<Required servers>
•  KDC server (as the authentication server)
•  LDAP server (to obtain attributes of the user that is logged in)
•  DNS server (to search for the KDC and LDAP servers)

<Supported environment>
•  Microsoft Windows Server 2003 SP2 (64-bit version is not supported.)
•  Microsoft Windows Server 2003 R2 SP2 (64-bit version is not supported.)
•  Microsoft Windows Server 2008 SP2 (64-bit version is not supported.)
•  Microsoft Windows Server 2008 R2 SP1
•  Microsoft Windows Server 2012
•  Microsoft Windows Server 2012 R2

<Servers supporting IPv6 environments>
•  Microsoft Windows Server 2008 SP2 (64-bit version is not supported.)
•  Microsoft Windows Server 2008 R2 SP1
•  Microsoft Windows Server 2012
•  Microsoft Windows Server 2012 R2

CAUTION:
Make sure to set the time of the server and the time of the device to be within a certain 
difference.
With Kerberos authentication, the time of the authentication server (KDC) and 
authentication client must be synchronized within a certain difference. The allowed 
difference is whichever one of the following is shorter.
•  5 minutes (hard-coded User Authentication setting)
•  [Maximum tolerance for computer clock synchronization] in the [Kerberos Policy] 

setting of the authentication server synchronization

To perform RLS authentication when SSL is disabled, the time of the client PC must be 
set to be synchronized with the authentication server.

LDAP authentication

When using LDAP authentication by SSO-H, the following conditions need to be satisfied.
<LDAP server>
•  Novell eDirectory V8.8 SP7
•  Lotus Domino V8.5

Note: 

It should comply with the specifications of the LDAP server product.

Operation check has been conducted for the following OS.

•  Microsoft Windows Server 2003 Enterprise SP2

•  Microsoft Windows Server 2008 Enterprise SP2 (x86)

•  Microsoft Windows Server 2012Microsoft Windows Server 2008 Enterprise SP2 (x86) 

Settings Common to Active Directory Authentication and LDAP Authentication

<Device settings>
When using LDAP authentication, the following settings must be appropriately specified.
•  TCP/IP settings
•  DNS server settings (when using Active Directory as the authentication server)
•  Date and time settings (when using Kerberos authentication with Active Directory)

<DNS server settings>
When setting the DNS server, the following conditions must be met.
•  The DNS domain name of the authentication server can be resolved
•  The port number used by LDAP/the Kerberos service can be obtained from the DNS server 

Содержание imageRUNNER ADVANCE C3325 Series
























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов