8
8
8-143
8-143
Service Mode > COPIER > OPTION > USER
Service Mode > COPIER > OPTION > USER
COPIER > OPTION > USER
TRY-STP
Stop setting at finisher tray full
Lv.2 Details
To set to stop/continue output at the time of tray full detection of the
Finisher.
Use case
Upon user’s request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
0 to 1
0: At tray full detection, 1: Height detection only
Default value
0
MF-LG-ST
Display/hide of long strip mode
Lv.2 Details
To set whether to display or hide the [Long Original] button.
When 1 is set, [Long Original] button is displayed in Copy > Options
screen and the long strip paper becomes available.
Use case
Upon user’s request. (use of long strip original or long strip paper)
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution
When setting long length paper, be sure to set the delivery destination
to Second Delivery (excluding delivery from Inner Finisher).
Display/adj/set range
0 to 1
0: Hide, 1: Display
Default value
0
Related user mode
Copy > Options
Function Settings > Common > Paper Output Settings > Output Tray
Settings
CNT-DISP
Display/hide of serial No.
Lv.2 Details
To set whether to display or hide the serial No. on the Counter Check
screen.
Use case
When setting to display/hide serial No. on the Counter Check screen
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
0 to 1
0: Display, 1: Hide
Default value
0
COPY-JOB
Setting of copy job reservation
Lv.1 Details
To set to enable/disable copy job reservation when the Card Reader/
Coin Manager is used.
Use case
Upon user’s request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
0 to 1
0: Enabled, 1: Disabled
Default value
0
COPIER > OPTION > USER
P-CRG-LF
ON/OFF of Drum Unit life warning
Lv.2 Details
To set whether to display a warning when the Drum Unit reaches its
life.
When 1 is set, a warning message is displayed when it reaches 95%
of its life.
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range
0 to 1
0: OFF, 1: ON
Default value
0
CPRT-DSP
ON/OFF of [Print Charge Log] button
Lv.1 Details
To set whether to display the [Print Charge Log] button to print the
charge logs on the charge log screen in user mode.
When “1: ON” is set, the button is displayed in Management Settings>
Charge Management> Charge Log Screen.
Use case
Upon user’s request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
0 to 1
0: OFF, 1: ON
Default value
0
Related user mode
Management Settings > Charge Management > Charge Log
PCL-COPY
Set of PCL COPIES command control method
Lv.2 Details
To set the binder control method of COPIES command with PCL.
Select whether to use the control method of Canon-made PCL or use
the same control method of non-Canon-made PCL.
Use case
Upon user’s request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
0 to 65535
0: Control method of Canon-made PCL (following the value of COPIES
command that is specified for each page to control on a page basis)
1: Control method of non-Canon-made PCL (handling the value of
COPIES command, which is specified for page 1 at the time of Collate
mode, as bind figure while the value of COPIES command for the next
page or later is invalid. Same control applies as Canon-made PCL at
the time of Non Sorted mode)
2 to 65535: For future use
Default value
0
