2
2
2-18
2-18
Process/Operation > Main Controller > Security > Delete Old Data
Process/Operation > Main Controller > Security > Delete Old Data
• Before disabling the HDD license transfer, the license depending on HDD such as Secure
print or PS must be disabled.
■ Delete Old Data
Background
This function is used after upgrading a flash memory model to a HDD model.
In the case of upgrading a flash memory model to a HDD model with imageRUNNER
ADVANCE C2020 series, there is a mechanism to transfer the user data to the HDD side by
the data migration function.
In consideration of power disconnection during data transfer or cancelling of model switching
at the time of data migration, the data should be copied rather than data transfer.
In the case of installing a HDD Encryption Kit or Data Erase Kit, the data in the flash memory
is not encrypted but left in the flash memory; therefore, this function is necessary to delete the
data.
Function overview
When this function is executed, the machine basically executes the same operation as
“Initialize All Data/Settings” (such as auto rebooting, processing at startup, complete deletion,
clearing).
The following shows the difference:
• SRAM is not deleted.
• The job information in the machine is deleted for the flash memory side only.
• The MEAP application information is deleted for the flash memory side only.
Caution:
In the case of returning a machine due to expiry of the lease period after upgrading the
machine, or in the case of disposing the machine, do not execute “Delete Old Data” but
execute the normal “Initialize All Data/Settings”.
The data to be deleted:
• Image data
• Address Book
• Temporary data
• The font and profile installed by the user
The data not to be deleted:
• Adjustment value at the factory
• Program and library at the time of factory shipment
• System data( such as the pre-installed font data, etc)
Operation
1. Select the following: Settings/Registration > Management Settings > Data Management >
Delete Old Data
2. Select “Yes”.
F-2-24
F-2-25
