manualshive.com logo in svg

Canon imageRUNNER ADVANCE C2030, Руководство по обслуживанию

Поделиться
Скачать
Canon imageRUNNER ADVANCE C2030 Скачать руководство пользователя страница 144

2

2

2-110

2-110

Process/Operation > External Auxiliary System > Power Supply Control > Energy Saving Function

Process/Operation > External Auxiliary System > Power Supply Control > Energy Saving Function

The Alarm Service is set to within 12 minutes.
•  * When one of the following is being executed, the Alarm Service (Time) is set.

•  - Time setting for ON/OFF of the Memory Lock

•  User Mode > Function Settings > Receive/Forward > Common Settings > Fax/I-Fax Inbox > 

Memory Lock Start Time

•  User Mode > Function Settings > Receive/Forward > Common Settings > Fax/I-Fax Inbox > 

Memory Lock End Time

•  - Output of the scheduled report

•  User Mode > Function Settings > Send > Common Settings > Communication Management 

Report > Specify Print Time (when not set to "Off")

•  User Mode > Function Settings > Send > Fax Settings > Fax Activity Report > Specify Print 

Time (when not set to "Off")

•  User Mode > Management Settings > Device Management > Device Information Delivery 

Settings > Communication Log > Specify Print Time (when not set to "Off")

•  - Scheduled Transmission Setting (Fax, Send)

•  - POP settings

•  User Mode > Function Settings > Send > E-Mail/I-Fax Settings > Network Settings > Next > 

POP Issue Interval (when not set to "0")

•  DHCP Setting (The interval is specified by the server)

•  E-RDS Setting (The interval is specified by the server)

•  SNTP Setting (The interval is specified by the server)

•  Auto delivery of device information

•  Scheduled specified printing of web browser

•  Time specified backup of Inbox document

•  The auto sleep timer is running (and for the time set by User Mode > Preferences > Timer/

Energy Settings > Weekly Timer Settings).

•  The sleep mode exit timer is running (for 15 seconds after exiting DEEP SLEEP)."

•  The network timer is running (and for the number of seconds set by Service Mode (Level 2) > 

COPIER > OPTION > NETWORK > WUEN-LIV.)

•  The wake up timer is running (for 10 minutes after receiving a wake up packet).

•  The hard disk drive protection timer is running (for 12 minutes after exiting from DEEP SLEEP 

and the HDD is powered ON. However, after a printing, scanning, and fax job is completed, 

this timer is disabled.)

•  The after linkup timer is running (for 1 minute after the machine is powered ON and the 

communication with the network is started).

•  The sleep notification timer is running (for 10 minutes after notifying the network module of 

entering DEEP SLEEP. However, when the network module responds, this timer is disabled).

T-2-71

Содержание imageRUNNER ADVANCE C2030









































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды