Canon imageCLASS MF8450c, Руководство по обслуживанию

Страница: 306 / 349

Chapter 16
16-25
<CST>
T-16-25
<ACC>
T-16-26
<INT-FACE>
Not used
<ASSPST-D>
Not used
<ASSPST-P>
Not used
<LCNS-OF>
T-16-27
yes 946 Sent scans/e-mails (black and white)
947 Sent scans/FTP (color)
948 Sent scans/FTP (black and white)
949 Sent scans/SMB (color)
950 Sent scans/SMB (black and white)
951 Sent scans/IPX (color)
952 Sent scans/IPX (black and white)
953 Sent scans/databases (color)
954 Sent scans/databases (black and white)
955 Sent scans/local prints (color)
956 Sent scans/local prints (black and white)
957 Sent scans/box (color)
958 Sent scans/box (black and white)
yes 959 Media scans (color)
yes 960 Media scans (black and white)
COPIER > OPTION > CST
Sub item Description
CST-U1 Not used
CST-U2 Not used
CST-U3 Not used
COPIER > OPTION > ACC
Sub item Description
COIN ON/OFF setting for the coin vendor display
- Change the message on the control panel prompting an operator to set a control card to the one prompting him/her to insert a coin.
Setting value:
0: Default message; "Set a control card."
1: Message for a coin vendor; "Insert a coin."
[Factory setting value/Value after RAM clearing: 0]
CARD Setting for installation of the new card reader
Enter a card number.
Setting range: 0 to 99999
[Factory setting value/Value after RAM clearing: 0]
When a card number is entered, the following settings are made.
- Initialize the information registered for department management.
- Register the following number of cards based on the card number entered.
MF9130/MF9150c/MF9170/MF9170C/MF9330C/MF9340C/MF9340C/MF9370C/iR C1021/iR C1021i/iR c1022/iR C1022i/iR C2110F/iR
C2110N:
1000 cards
MF8450/MF8450C:
100 cards
However, the number of usable IDs is 99999 maximum.
- When 0 is specified for the card number, the department ID is registered from 1.
CONTROL Control of PDL printer output
Setting value: 0: Perform printing without a card. 1: Perform printing when a card is inserted.
[Factory setting value/Value after RAM clearing: 0]
CC-SPSW Setting of whether or not to support the control card I/F (CC-V)
Setting value: 0: Do not support the control card I/F. 1: Support the control card I/F.
[Factory setting value/Value after RAM clearing: 0]
COPIER > OPTION > LCNS-OF
Disabling no transfer of license
- ST-xxxx, Display of the installation status
Sub item Description
ST-SEND Display of the installation status of the Send function when disabling no transfer
Setting value: 0: ON, 1: OFF
[Factory setting value/Value after RAM clearing: 0]
Compatibility No. Counter description