manualshive.com logo in svg

Canon imageCLASS MF8450c, Руководство по обслуживанию

Canon imageCLASS MF8450c - многофункциональное устройство, предназначенное для офисного использования. На нашем сайте вы можете бесплатно скачать сервисный мануал, руководство пользователя и другие инструкции по эксплуатации этого устройства. Посетите manualshive.com для загрузки.

Поделиться
Скачать
background image

Chapter 16  

16-16

16.2.5 OPTION

16.2.5.1 OPTION List

0020-2016

imageCLASS MF9170c / imageCLASS MF9150c / imageCLASS MF8450c

<BODY>

T-16-22

SPL25407

Setting of thin paper/rough paper
Change the process speed to 4/5 speed. Use the temperature control table for thin paper/rough paper. (Thin paper only)
Do not change the process speed, but change the temperature control table. (Plain paper, Thick paper 2 only)
Setting value: 0: OFF, 1: ON
[Factory setting value/Value after RAM clearing: 0]

SPL47267

Setting of high-humidity OHT
Decrease the final output value of transfer bias by 100V. (OHT only)
Setting value: 0: OFF, 1: ON
[Factory setting value/Value after RAM clearing: 0]

SPL47667

Setting of prevention of re-transfer
Decrease the transfer bias for the 3rd/4th station depending on the environment.
(Only when high-humidity OHT/high-humidity gloss film/high-resistance paper/4mil OHT is not specified)
Setting value: 0: OFF, 1: ON
[Factory setting value/Value after RAM clearing: 0]

SPL34691

Setting for improvement of color misregistration
Rotate the fixing motor in +0.5% speed up to the 10th page. Secure the wait time of 10 seconds when the 1st page is picked up at the time of initial 
rotation, mode switching, or toner ejection.
Setting value: 0: OFF, 1: ON
[Factory setting value/Value after RAM clearing: 0]

SPL14682

Setting for prevention of fogging 2
Turn off the pre-exposure operation. Do not add a transfer bias as measures to prevent a bird's foot print on the trailing edge.
Setting value: 0: OFF, 1: ON
[Factory setting value/Value after RAM clearing: 0]

SPL25200

Setting for improvement of OHT transparency
Set the controlled temperature at 180 degC, and perform idling of the fixing machine for 45 seconds before initial rotation.
Setting value: 0: OFF, 1: ON
[Factory setting value/Value after RAM clearing: 0]

SPL53649

Setting of engagement for monochrome mode
Perform full engagement of the ETB.
Setting value: 0: OFF, 1: ON
[Factory setting value/Value after RAM clearing: 0]

SPL35607

Setting of measures for hot offset
Decrease the controlled temperature by 10 degC without exception.
Setting value: 0: OFF, 1: ON
[Factory setting value/Value after RAM clearing: 0]

SPL14660

Not used

SPL65676

Switching of the margin at the lead edge (in the direction of increasing the margin)
Increase the margin at the lead edge of the paper. The standard margin is set if the setting conflicts with that of the decreased margin at the lead edge.
Setting value: 0: OFF, 1: ON
[Factory setting value/Value after RAM clearing: 0]

SPL65677

Switching of the margin at the lead edge (in the direction of decreasing the margin)
Decrease the margin at the lead edge of the paper. The standard margin is set if the setting conflicts with that of the increased margin at the lead edge.
Setting value: 0: OFF, 1: ON
[Factory setting value/Value after RAM clearing: 0]

SPL68676

Switching of the margin at the right/left side (in the direction of increasing the margin)
Increase the margin at the right and left side of the paper. The standard margin is set if the setting conflicts with that of the decreased margin at the 
right/left side.
Setting value: 0: OFF, 1: ON
[Factory setting value/Value after RAM clearing: 0]

SPL68677

Switching of the margin at the right/left side (in the direction of decreasing the margin)
Decrease the margin at the right and left side of the paper. The standard margin is set if the setting conflicts with that of the increased margin at the 
right/left side.
Setting value: 0: OFF, 1: ON
[Factory setting value/Value after RAM clearing: 0]

SPL25607

Switching of the print mode setting
Switch the print mode for "plain paper" from "Normal" to "Light" as measures for hot offset at overseas countries.
Setting value: 0: OFF, 1: ON
[Factory setting value/Value after RAM clearing: 0]

COPIER > OPTION > BODY

Sub item

Description

DFDST-L1

Adjustment of the level of dust detection when DF is used (Correction of an interval between sheets)
When the value is increased, the dust detection level is increased. (This makes it easier to detect the dust causing low-density lines.)
Setting range: 1 to 9999

DFDST-L2 

Adjustment of the level of dust detection when DF is used (Detection after a job)
When the value is increased, the dust detection level is increased. (This makes it easier to detect the dust causing low-density lines.)
Setting range: 1 to 9999

COPIER > FUNCTION > SPLMAN

Sub item

Description

Содержание imageCLASS MF8450c






























































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для imageCLASS MF8450c

VBM POCKET Instructions For Use Manual preview
POCKET
Бренд: VBM Страницы: 36
W&H Med Lara Instructions For Use Manual preview
Lara
Бренд: W&H Med Страницы: 122
Taylor-Wharton XL Series Instructions Manual preview
XL Series
Бренд: Taylor-Wharton Страницы: 25
i-CAT FLX V Series User Manual preview
FLX V Series
Бренд: i-CAT Страницы: 96
Teac HS-2 Brochure preview
HS-2
Бренд: Teac Страницы: 9
Tascam SS-R1 Specifications preview
SS-R1
Бренд: Tascam Страницы: 3
Tascam DR-680 Owner'S Manual preview
DR-680
Бренд: Tascam Страницы: 56
Tascam Portastudio 2488 Reference Manual preview
Portastudio 2488
Бренд: Tascam Страницы: 28
Tascam DR-08 Release Note preview
DR-08
Бренд: Tascam Страницы: 2
Tascam DA-3000 Spec Sheet preview
DA-3000
Бренд: Tascam Страницы: 5
Tascam CD-RW901 Technical Documentation preview
CD-RW901
Бренд: Tascam Страницы: 3
Tascam CD-RW901 Specifications preview
CD-RW901
Бренд: Tascam Страницы: 2
Tascam DA-98HR Service Manual preview
DA-98HR
Бренд: Tascam Страницы: 107
Tascam DA-38 Quick Tips preview
DA-38
Бренд: Tascam Страницы: 9
Tascam BB-1000CD Owner'S Manual preview
BB-1000CD
Бренд: Tascam Страницы: 56
Tascam 238 Owner'S Manual preview
238
Бренд: Tascam Страницы: 30
Task Force Tips Master Foam Series Instructions For Installation, Operation And Maintenance preview
Master Foam Series
Бренд: Task Force Tips Страницы: 16
Task Force Tips EDUCTOR 125 Series Instructions For Installation, Operation And Maintenance preview
EDUCTOR 125 Series
Бренд: Task Force Tips Страницы: 16

Бренды по названию

Популярные бренды

Загрузить еще бренды