manualshive.com logo in svg

Canon C5000 - MultiPASS Color Inkjet Printer, Руководство по обслуживанию, Страница: 85 / 221

Поделиться
Скачать
Canon C5000 - MultiPASS Color Inkjet Printer Скачать руководство пользователя страница 85

Chapter 2: Technical Reference

Waste Ink Absorbers

This model has a single ink absorber which absorbs waste ink as follows

l 

Suction waste ink

Waste ink sucked from the cap

l 

Maintenance jet waste ink

Waste ink from the test firing used to adjust the nozzle condition

l 

Ink detection waste ink

Waste ink fired to detect the presence of remaining ink during fax receipt

The amount of ink absorbed is counted as a total of all of these. When the
counted absorption levels reach 

 the 

“CHECK PRINTER” message (error

code 

 will be displayed, and printing will stop to allow the absorber to be

changed. To clear the error, it is necessary to replace the absorbers and to reset
the waste ink absorption level counts. If there is no other 

   this time,

any image in the memory will be output automatically. The waste ink absorber
should be replaced after this. For the method of resetting the waste ink

 level counts. see 

Paae i-50.

2-17

Содержание C5000 - MultiPASS Color Inkjet Printer






























































































































































































































Отзывы:

Нет отзывов