manualshive.com logo in svg

Canon C5000 - MultiPASS Color Inkjet Printer, Руководство по обслуживанию, Страница: 204 / 221

Поделиться
Скачать
Canon C5000 - MultiPASS Color Inkjet Printer Скачать руководство пользователя страница 204

Chapter 2: Technical Reference

2.6 720 

dpi Printing/Smoothing Feature

2.6.1 Canon extension mode

In 

the Canon extension mode, the printer driver creates 720 dpi data for the horizontal axis

and sends it to the printer, resulting in high-quality printing.

With   black BJ cartridge installed, the printer driver 

 the printed character’s

edges at 720 dpi along the 

 The 720 dpi data for the horizontal axis is sent

to the printer and the edges are smoothed at a high resolution.
When a color BJ cartridge is installed, the multi-value data of the picture elements
processed by the printer driver for color correction, etc., is assigned three values (no
printing, single-dot printing, two-dot printing) for the picture elements. In the 

 of two-

dot printing, the second dot is printed in the 720 dpi position. As a result, the degree of
gradation is high in the printing.

2.6.2 

Emulation mode

When a black BJ cartridge is installed for printing, the printed character’s edges can be
smoothed at a high resolution of 720 dpi along the horizontal axis. Dots along the
character’s edges are added or deleted for smoothing the edge. Along the horizontal axis,

dots 

 also overlapped by a half-dot space. This eliminates jaggies and increases the

equivalent horizontal resolution at twice.
This smoothing feature greatly improves low-resolution, 180 dpi characters. However, it
does not give noticeable improvement to True Type fonts and illustrations.
Note that with a color BJ cartridge installed, the emulation mode’s smoothing feature
cannot be used.

 inch

Add 

D o

, 

Delete Dot

 inch

 inch

Figure 2-5 720 dpi Printing/Smoothing Feature

2-7

Содержание C5000 - MultiPASS Color Inkjet Printer






























































































































































































































Отзывы:

Нет отзывов