manualshive.com logo in svg

Canon C5000 - MultiPASS Color Inkjet Printer, Руководство по обслуживанию, Страница: 16 / 221

Поделиться
Скачать
Canon C5000 - MultiPASS Color Inkjet Printer Скачать руководство пользователя страница 16

Chapter 1: General Description

1   Overview

This product is a G3 transreceiving facsimile based on the ITU-T recommendation. It can
be used in telephone networks.

*: This mark indicates new function.

Excellent print quality

The high-performance print head offers 360   360 dot per inch 

 resolution for text and

graphics.

Automatic switching between fax and voice calls

Fax/telephone switching allows you to receive fax messages and normal phone calls on a
single line.

 cartridge

REFER TO PAGE 2-16.

The BC-20 and BC-21 BJ cartridges provide excellent print quality for crisp, clean-looking
documents.

Convenient paper handling

The paper tray holds up to 100 sheets of plain letter, legal, or A4 paper, and the automatic

document feeder can hold up to 20 letter-size, 

 or 10 legal-size pages.

Simple maintenance

The replaceable ink cartridge contains the ink and the print head. When it runs out of ink,
simply replace it.

Ink detection function

REFER TO PAGE 2-16.

This model has a new ink detection function. After each received page is printed, ink is
ejected in front of a photosensor, so that the machine can detect whether there is ink
remaining or not.

Copy function

This machine can make up to 99 black and white (including halftones) copies of a document
at   time, at a rate of up to three copies per minute.
It can also make one color copy at   time at   

 of ten minutes per copy.

Full-color and 

 gray-scale (for PC)

REFER TO PAGE 2-34.

 using the settings in the 

 Desktop Manager software, you can scan photos in

full color or with 256 

 of gray, rather than just in black and white, ensuring that

photos 

 

 as clearly as

possible.

High-resolution scanning

This machine 

 scan 

 at true resolutions of 30   300 dpi, 

 

 of 301   600 dpi.

l-l

Содержание C5000 - MultiPASS Color Inkjet Printer






























































































































































































































Отзывы:

Нет отзывов