Canon C5000 - MultiPASS Color Inkjet Printer, Руководство по обслуживанию, Страница: 118 / 221

Chapter 3: Maintenance Service
4.2
Errors Shown on the Display
4.2.1 User error message
Look for the applicable error message and execute the appropriate countermeasures.
SIGNAL”
Cause:
The receiving fax did not answer within 35 seconds. timer over)
Solution: Contact the other party and have them check their can try to
send the document manually. For an call, add pauses to the
registered number.
Cause:
The touch tone/rotary pulse setting on your fax is incorrect.
Solution:
Set your fax to the setting that matches your telephone line.
Cause: The other party is not using a G3 machine.
Solution: Contact the other party and them send or receive the
using a G3 machine.
Cause: The other party’s fax is not working.
Solution: Contact the other party and have them check their fax.
Cause: The telephone number you dialed is busy.
Solution: Try sending the document at a time.
“CHECK
Cause
Document jam. This is displayed the document detects
paper, but the document edge cannot detect the leading edge of
the document with 15 seconds from the start of feed operation.
Solution:
Clear the document jam.
Cause:
size of the paper loaded in the paper cassette is different from the
paper size set by the Manager of Setup
Solution: Set the correct paper size in
“FAX
PRINTER SETUP” setting.
‘CHECK
PRINTER”
Cause:
The printer’s internal unit has malfunctioned.
(1) Remove the jammed paper. (Check the paper end is OFF.)
(2) Press STOP
Reinstall the
(4) Turn the on.
(5) Set the service SSSW SW01 bit 0 to and check the
code. to the for that error code.
Refer to
Page
3-15