Canon C5000 - MultiPASS Color Inkjet Printer Скачать руководство пользователя страница 45

Страница: 45 / 221

Chapter General Description

Powering Up

Follow these guidelines when connecting your

to a

power source:

The

is intended for use in the U.S. and Canada

only and requires 120 V AC. Do not use it outside the U.S. or
Canada.

the

only into a

AC,

prong grounded outlet.

Use only

cord that

with the unit. Using longer

cord or extension cord can cause the

malfunction.

Unplug the unit only by pulling on the plug itself.

pull on the

cord.

Do not plug the

into

outlet shared with an

appliance such as an air conditioner, computer,

typewriter,

or copier. These devices generate electrical noise, which can
interfere with the

operation.

Make sure nothing is

the power cord, and that the cord

cannot be walked on or tripped over.

Do not overload the electrical outlet. Make sure the total amperage
used by all

machines plugged into the outlet does not exceed

ampere rating of the outlet’s circuit

Make

that the operation

of the

properly closed, and that there are no documents in this

1 - 3 1

Содержание C5000 - MultiPASS Color Inkjet Printer






























































































































































































































Результаты поиска

Содержание C5000 - MultiPASS Color Inkjet Printer

Отзывы:

Canon C5000 - MultiPASS Color Inkjet Printer, Руководство по обслуживанию, Страница: 45 / 221

Результаты поиска

Содержание C5000 - MultiPASS Color Inkjet Printer

Отзывы: