manualshive.com logo in svg

Canon C5000 - MultiPASS Color Inkjet Printer, Руководство по обслуживанию, Страница: 41 / 221

Поделиться
Скачать
Canon C5000 - MultiPASS Color Inkjet Printer Скачать руководство пользователя страница 41

Chapter 1: General Description

5.2 

General Cautions

5.2.1 Unit cautions

Safety Instructions

Read these safety instructions thoroughly before using your 

 and keep them handy in case you need to refer to them later.

A

Except as specifically described in this manual, do not attempt to service
the 

 

 yourself. Never attempt to disassemble the unit:

opening and removing its interior covers will expose you to dangerous
voltages and other risks. For all service, contact your local authorized
Canon dealer or service center.

Cl

Always follow all warnings and 

 

 marked on the

 

Use the 

 

 only on   sturdy, stable, level surface. If

the 

 

 falls, it could be seriously damaged.

Do not use the 

 

 near water. If you spill liquid on 

into the unit, unplug it immediately and call your local authorized
Canon dealer or 

 center.

The back and bottom of the 

 

 include slots 

openings for ventilation. To keep the 

 

 from

overheating (which 

 cause it to operate abnormally 

 create a

fire risk), take 

 not to block or 

 these openings. Do not

operate the unit on a bed, sofa, rug, or 

 similar soft surface, or

near a radiator or other heat source. 

 not 

 the 

 in a 

 or cabinet or on 

 unless adequate

ventilation is available See “Choosing a 

 for Your

 

 on 

 2-3 for 

 on how much space

the unit needs for ventilation

Operate 

 

 

 

 from 

 

 of 

 

indicated on the unit’s label. If 

 

 not 

 of the type of power

 from your 

 outlets, contact your 

 power company.

The 

 

 has   three-prong, grounding-type plug (the

third pin is a grounding pin) that fits only into 

 This is a safety feature. If the outlet you intend to 

 is not

the correct type, contact an 

 to 

 it: do not 

 a 

2 

 as this 

 the three-pronged plug’s 

grounding

purpose.

1-27

Содержание C5000 - MultiPASS Color Inkjet Printer






























































































































































































































Отзывы:

Нет отзывов