manualshive.com logo in svg

Canon C5000 - MultiPASS Color Inkjet Printer, Руководство по обслуживанию, Страница: 203 / 221

Поделиться
Скачать
Canon C5000 - MultiPASS Color Inkjet Printer Скачать руководство пользователя страница 203

Part   Printer

a) MPU (ICI)

Printer controller 

 is 

 by the 

 ROM 

 program to control

printer mode operations.

b) 

 ROM 

Besides the printer hardware control program and font image data, the following data are

stored in the Control/CC ROM.

l 

Emulation software

This is the control program for the printer, which can emulate either IBM Proprinter

   EPSON LQ-2550.

l 

Font image data

 360 dpi character 

 data for each of the 

 cartridge nozzles.

When the printer is emulating IBM Proprinter 

 the character designs from

Character Set 1, 2, All Characters Chart, Code Page; 

 850 (Multilingual)/ 852

(East 

Europe)/ 855 

 857 (Turkish)/ 860 (Portuguese)/ 863 (Canadian French)/

864 (Arabic)/ 865 (Norway)/ 869 (Greek) can be selected. When the printer is emulating
EPSON LQ-2550, the EPSON Italics Character Set, EPSON Graphics Set can be
selected, and the language chosen from the International Character Set.

l 

Mask patterns in fine mode

c) Printer controller (IC5)

The main functions of the system controller as follows:

l 

Interface 

The centronics interface controller receives 

 parallel data sent from the computer in

synchronization with the data strobe pulse by BUSY   

 handshaking It controls

other interface signals. The data received from the interface are stored in the receive
buffer in DRAM, and is analyzed by the MPU. If the printer initialize signal 

 is

input to the printer 

 and MPU f

the interface, the printer controller

outputs the BUSY status immediately, and the MPU prints printing data stored in the
print buffer, then initializes 

 printer.

l 

Buffer controller

The buffer controller automatically writes received data into the receive buffer in
DRAM, controls the remaining data in the receive buffer, reads data from the receive
buffer, and clears data after rending.

d) DRAM (IC4)

Besides the printer hardware 

 data storage area, the DRAM comprises the

following;

. Input buffer

Reception data from the 

 are 

 momentarily. The data are then analyzed

by the MPU, and 

 erased to 

 

 for the next data.

l 

Printer buffer

Two 

 of BJ cartridge print data are stored. After being printed out, the data are

then erased to 

 room   

 

 data.

l 

Download buffer

When emulating 

 IBM 

 

 besides the data stored in the ROM, font

 data 

 transferred 

 the computer and stored.

2-6

Содержание C5000 - MultiPASS Color Inkjet Printer






























































































































































































































Отзывы:

Нет отзывов