manualshive.com logo in svg

Canon C5000 - MultiPASS Color Inkjet Printer, Руководство по обслуживанию, Страница: 115 / 221

Поделиться
Скачать
Canon C5000 - MultiPASS Color Inkjet Printer Скачать руководство пользователя страница 115

Part 1: Facsimile

c-2) Adjustment

(1) 

Set the paper thickness lever to the right and place the gap gauge at position B.

 Move the carriage to position B.

(3) Set the paper thickness lever to the left.
(4) Loosen screw A until the carriage guide frame moves forward under the carriage’s

own weight with 

 B as a pivot.

(5) Lightly push the screw A end of the carriage guide frame once or twice and check

that the carriage guide frame moves around screw B as shown by the arrows.
If it does not return to the original position, screw B is too tight. And if it moves on
the screw B end as well, screw B is too loose. Refasten the carriage guide frame
lightly again and repeat the procedure from C- 1) 

Adjustment 

 Lightly tighten screw A.

(7) Put the paper thickness lever to the right and move the carriage to position A. Then

place the gap gauge at position C.

 Move the carriage to position C.

(9) Put the paper thickness lever to the left.

Position 

Position C

Figure 3-10 Head Gap Adjustment 

3-12

Содержание C5000 - MultiPASS Color Inkjet Printer






























































































































































































































Отзывы:

Нет отзывов