Canon C5000 - MultiPASS Color Inkjet Printer Скачать руководство пользователя страница 44

Страница: 44 / 221

Part 1: Facsimile

Choosing a Location for Your

Before unpacking your

follow these guidelines to

choose the best location for it.

Please review the information provided in “Safety Instructions”, to

make sure you are installing your

for safe use.

Put the

in a cool, dry, clean, well ventilated place:

Make sure the area is free from dust.

Make sure the location is not affected by extreme
changes, and always stays between 50” and

and

Make sure the area’s relative humidity is

between 10%

and 90%.

Keep the

away from

sunlight.

If possible, put the

an existing telephone

outlet, to avoid the expense of installing a new one.

Place the

an electrical

outlet that accepts

three-prong, grounded plug,

provides

power. (This is standard for U.S.

if you

any doubts,

contact an

the power for you.)

Place the

the

you

be connecting it to.

Make sure you

it easily, as

will

using it as printer,

fax

machine,

copier, scanner, and telephone.

Do not plug the

into the

circuit as

such as an

conditioner, electric typewriter, television,

or copier. Such

generate electrical noise that can interfere

with your

to send or receive

Set the

on a

stable, vibration-free surface that

is strong enough to support its

(about 12.3

kg).

Make sure the

you choose provides

around

ventilation, and to allow

flow freely into and out of the unit.

figure below shows the

minimum space

for the unit.

l-30

Содержание C5000 - MultiPASS Color Inkjet Printer






























































































































































































































Результаты поиска

Содержание C5000 - MultiPASS Color Inkjet Printer

Отзывы:

Canon C5000 - MultiPASS Color Inkjet Printer, Руководство по обслуживанию, Страница: 44 / 221

Результаты поиска

Содержание C5000 - MultiPASS Color Inkjet Printer

Отзывы: