Campbell TurfWeather, Инструкция по эксплуатации

Страница: 72 / 81

TurfWeather Weather Station
b. Once the radio frequency has been verified, orient the spread spectrum
radio board so that the main electronics board connectors will mate
with the proper pins on the bottom of the radio board. Presses the
spread spectrum radio board into its mating connectors until it is
firmly seated, and then tightly attach the Velcro board retaining strap.
c. Place the two sections of the weather station main body together,
making sure that none of the wiring bundles will be crushed by the
edges or by the seven housing screws when the two sections are
secured with screws.
d. Reinstall and tighten the seven screws that hold the weather station
main body sections together.
4. System Test:
a. Turn on the weather station power switch and initiate communications
with your weather station.
b. Verify that the sensors are reporting values.
c. Re-install the weather station on its mast, and reconnect the ground
and power wires.
65