Campbell TurfWeather, Инструкция по эксплуатации

Страница: 28 / 81

TurfWeather Weather Station
2. If using mast extension(s), pound extension(s) into the mast by inserting
the tapered end of the extension into the top of the mast and striking the
extension top with a wooden block or hard rubber mallet (Figure 2-4).
Mast extension
Tripod mast
FIGURE 2-4. Pound the tapered end of the mast extension (left) into
the tripod mast. If using two extensions, pound the tapered end of the
second extension into the top of the first extension.
Do not use a metal hammer to pound in the mast
extension since this will deform the top of the mast
extension. CAUTION
3. If using the guy-wire kit, loosely install the guy-wire kit by following
Procedure 2: Guy-wire Kit Installation (Section 2.4.1.3).
Do not tighten the turnbuckles yet. The turnbuckles will be
tightened in step 5 of Procedure 3: Mounting the weather station
on a Tripod or Pole (Section 2.4.1.4).
NOTE
4. Install the mast in the tripod and adjust mast height if necessary
(Figure 2-5).
Mast
Tripod
FIGURE 2-5. The mast fits in the center of the tripod. The mast height
is adjusted by moving the tripod legs or removing the mast cup and
sliding the mast up or down in the collars.
21