Campbell TurfWeather, Инструкция по эксплуатации

Страница: 36 / 81

TurfWeather Weather Station
1
2
FIGURE 2-13. The right close up is the 14 AWG wire and the #4 cable
attached to the tripod coupling.
2. Mount the tripod coupling on the tripod mast so that it clamps the 14
AWG wire against the tripod (1 of Figure 2-13).
3. Drive the ground rod into the soil using a fence post driver or sledge
hammer leaving about 3 inches (7.5 cm) above the ground.
4. Loosen the middle screw in the tripod coupling.
5. Place one end of the #4 cable in the tripod coupling hole then tighten the
screw (2 of Figure 2-13).
6. Attach the other end of the #4 cable to the ground rod using the ground
rod coupling (Figure 2-14).
FIGURE 2-14. The #4 cable connected to the ground rod.
29