Campbell TurfWeather, Инструкция по эксплуатации

Страница: 43 / 81

TurfWeather Weather Station
P/N 18914 Auxiliary Battery Unit kit components:
9
Enclosure with 7AHr battery
9
18971 Battery Cable
9
U-bolt, washers and brass nuts
1. Preparation:
a. Turn the power switch on the weather station to the “OFF” position.
b. Disconnect the power input cable and ground wire connections from
the weather station, using the 5/16 inch wrench for the ground wire
connection.
c. Remove the weather station from its location by using the ½ inch
wrench to loosen the two U-bolt nuts securing the weather station to
its mast. Make note of the orientation of weather station. NOTE: Do
not remove the mast bracket from the weather station.
d. Bring the weather station to an enclosed location, preferably near the
Host computer, and place it on a flat stable surface with an area of at
least three times the size of the weather station base.
2. Battery Pack Removal:
a. Invert the weather station main body and rest it on a support that
eliminates any stress on the wind speed or wind direction sensors,
and/or the rain gauge. A rolled bath towel placed in the center of the
main body, next to the rain gauge will generally suit the purpose.
36