Campbell TurfWeather, Инструкция по эксплуатации

Страница: 67 / 81

TurfWeather Weather Station
4. System test:
a. Turn on the weather station
b. Look into the small window on the bottom of the weather station
marked “Scan – Receive” and confirm that the LED flashes every ten
seconds.
c. Re-install the weather station on its mast, and reconnect the ground
and power wires.
3.18 Main Electronics Board (Motherboard) Removal and
Replacement Procedure
The removal and replacement of a TurfWeather weather station main
electronics board does not require training, special tools, or test equipment.
However, it is not a user repairable item and must be returned to an authorized
local Toro distributor for evaluation and repair. Additionally, the main body of
the weather station does need to be opened, and the person replacing this
electronics board should observe basic electro-static discharge (ESD)
precautions (described below) to avoid damage to the weather station
electronics inside the main body of the weather station. There is no personal
electrical hazard involved, and this procedure can be accomplished by anyone
possessing basic mechanical skills. Please read this entire procedure before
beginning work.
Tools Required:
9
½ inch wrench
9
5/16 inch wrench
9
#2 Phillips screwdriver
60