CAMPAGNOLA MASTER, Руководство по эксплуатации и обслуживанию

Страница: 39 / 221

0310.0419 Use and maintenance manual
– Instructions
Translation of the Original instructions Rev.: 00, Date 22/06/2023
Page 39
Symbols and warnings
4 ASSEMBLY AND START-UP
Installation
4.1.1 Component installation
•
Remove the harvesting head (11) and prongs (12) from
the container.
•
Insert the prongs (12) with light pressure on the two
supports (13), making sure that the locking teeth have
come out of the support.
•
Mount the harvesting head (11) on the pole (5),
connecting the connectors (9 and 10) protruding from
the head clamp and the pole.
•
Tighten the screws (15) of the clamp on the head (11).
•
Pull the handle (1) and the power cable (16) out of the container.
•
Mount the handle on the pole, connecting the connectors (8 and
10) coming out of the handle clamp and the pole.
•
Tighten the screws (15) of the clamp on the handle (1).
•
Insert the power cable (16) into the slot under the handle.
•
Connect the power cable (16) to the connector (4).
General warnings Adequate clothing is mandatory
Obligation to read the Use and Mainte-
nance Manual
Hand protection is mandatory
Obligation to wear ear protectors,
goggles and to protect the head
Obligation to wear safety shoes for
foot protection
Do not use the tool in rain, thunder-
storms, adverse weather conditions or
on wet branches
Prohibition to use the tool in the
presence of overhead power lines and
to maintain a safety distance of 10 m
from things, animals and/or persons
not involved/object of the activity.