CAKEWALK Cakewalk SONAR, Руководство пользователя

Страница: 251 / 610

251
Engl
ish
Tooltips give you a constant readout of the cursor position, how much you’ve edited the selection, and
how many notes you’re editing.
In the picture below, the tooltip lists the current location of the cursor, how far the selection has moved
from its original location (1252 ticks to the right), the current pitch level and MIDI note number of the
cursor (E8 100), how far from the note’s original pitch the cursor has moved (1 half-step higher), and
how many notes are in the selection.
When you drag multiple notes, the Piano Roll view “auditions” them, so you can hear all of them as they
pass through different pitch levels.
To Edit Notes with the Draw Tool
1. If you want to edit multiple notes at the same time, select them with the Select tool. Editing any of
the notes in the selection edits all the selected notes in the same way.
2. Click to select the Draw tool. (make sure that the Auto-Erase button is not enabled, unless you
want to delete notes).
3. Set the Snap to Grid to the desired value (if you’re editing in the Inline Piano Roll view, make sure
you use the PRV tab of the Snap to Grid dialog).
4. Edit notes as described in the table:
To do this… Do this…
Change the start time, but not the
duration Drag the left edge of the note in either direction.
The start time of the note is moved to the new location.
Change the pitch Drag the middle of the note up or down.
Move the note horizontally Move the cursor just inside the left edge of the note until it
looks like this:
Then drag left or right.
Velocity column
Draw tool in velocity-edit mode
Tooltip showing cursor position