CAKEWALK Cakewalk SONAR Скачать руководство пользователя страница 124 | Manualshive

Страница: 124 / 610

CAKEWALK Cakewalk SONAR Скачать руководство пользователя страница 124

124

:

If your computer has several MIDI outs, choose the ones you want to use and put them in a particular
order using the

Options-MIDI Devices

command. The order in which your MIDI devices appear in the

Output menus in the Track and Console views is based solely on the order in which the selected outs
appear in the MIDI Devices dialog box. As a result, the order in which your devices appear in a track’s
output control may not match the port numbers that appear on your external multiport MIDI device.

When you first run SONAR it asks you to select MIDI devices. You may want to change these selections
in the future. You can do so by selecting different devices in the MIDI Devices dialog box.

Your computer is usually equipped with at least one audio device—your computer sound card. Your
setup may have several different audio output devices, or you may have a multichannel sound card that
presents itself to your computer as though it were several different devices, one for each stereo pair. In
SONAR, audio tracks are assigned to main outs or buses. Each main out represents a hardware device.
You use the Output control to assign a track in a project to the main or bus you want to use.

While you need to choose the MIDI output devices you want to use before you assign them to tracks, all
of your audio devices can be assigned to tracks freely. You do not need to configure them the way you do
MIDI devices. If you have a voice modem or speakerphone in your computer, however, you might want to
set up SONAR so that it won’t use those devices. Also, note that some dedicated audio equipment has
specific setup requirements. For more information, see Chapter 20,

Improving Audio Performance

.

To Choose MIDI Devices

1.

Choose

Options-MIDI Devices

to display the MIDI Devices dialog box.

2.

Click on any MIDI device in the Outputs list.

3.

To move any device to the top of the list, deselect all other devices and click Move to Top to move
the selected device to the top of the list.

4.

When all devices are selected in the order you want, click OK.

These
devices are
not selected

«
...
122
123
124
125
126
...
»

Содержание Cakewalk SONAR



































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов