CAKEWALK Cakewalk SONAR, Руководство пользователя, Страница: 360 / 610

360
:
Now you can use separate effects for each of your ReWire devices.
Note : Always close your ReWire applications before closing SONAR or a SONAR project.
Mixing Down ReWire Instruments
To either mix down or bounce ReWire instruments to new audio tracks, use the same procedures as for
synths.
For more information, see “Converting Your Soft Synth Tracks to Audio” on page 355
Automating ReWire Instruments
You can automate audio and MIDI tracks that are patched to ReWire instruments the same ways you
can automate any of SONAR’s audio and MIDI tracks.
For more information, see Chapter 13, Automation .
ReWire Troubleshooting Guide
The following lists some common issues when you use ReWire with SONAR:
• SONAR Won’t Close Properly —Always close your ReWire applications before closing SONAR or
a SONAR project.
• Rebirth Won’t Play After I Open Its Property Page —Make sure that the Loop switch in
Rebirth is enabled.
• My ReWire Project Plays at a Different Tempo when Opened from SONAR —When you
open a ReWire project from SONAR, the ReWire project assumes SONAR’s default tempo, which is
100. Change SONAR’s tempo to match your ReWire project.
• My MIDI Controller Works in SONAR or my ReWire Application, but not Both —Choose
different MIDI In ports for both SONAR and your ReWire application. Do this in SONAR by using
the
Options-MIDI Devices command, and highlighting the MIDI In port you want to use in
SONAR. If you only have one MIDI In port on your MIDI interface or sound card, enable that input
in either SONAR or your ReWire application, and disable that input in the other application.
• I Get a MIDI Input Error Message When I Open a ReWire Application— If you only have
one MIDI Input port on your MIDI interface, you probably have that one reserved for SONAR,
leaving none for your ReWire application. If you would rather use your MIDI controller in the
ReWire application instead of SONAR, you can deselect your MIDI input port in SONAR’s MIDI
Devices dialog (
Options-MIDI Devices command), and then select that MIDI Input from
whatever menu your ReWire application has for that purpose. If you have multiple inputs on your
MIDI interface, simply select different ones for SONAR and your ReWire application.
Stand-alone Synths
Some soft synths can be run independently of SONAR’ and do not need to be inserted to the Synth Rack
or an FX bin to use. After you install this kind of synth and restart your computer, the name of the
synth’s MIDI driver appears in SONAR’s MIDI Devices dialog box under Outputs.
Playing a Stand-alone Synth
SONAR plays this kind of synth by seeing it as additional MIDI outputs in both the MIDI Devices
dialog box and in MIDI tracks’ output fields.
To Play a Stand-alone Synth
1. Use the Options-MIDI Devices command to open the MIDI Devices dialog box.