C-COM Satellite Systems Inc.
iNetVu™ 7710 Controller User Manual
78
System Status
Displays current system environment
•
System Idle
No operations are currently being performed.
•
ACP Testing
ACP Testing is being performed.
•
Skew Adjusting
Polarization adjustment to adjust the polarization axis for any vehicle inclination. The
Azimuth Axis will rotate 90º on both sides of the peaked azimuth angle, then return to
the satellite position, and adjust the polarization axes to compensate for any recognized
mount inclination.
•
Manual Operation
Manually controlled movement via Controls menu has been detected.
•
Mount Testing
System test or demo being performed via System Test and Demo menu.
•
Peaking on Satellite
System makes minor adjustments in positioning to receive optimal Signal Strength.
•
CP Calibration
Compass Calibration is being performed.
•
Going to Position
An automatic movement command has been initiated (i.e. Find Satellite or Deploy
Antenna) and the antenna is moving into the designated position.
•
Searching Satellite
Antenna is performing a search pattern to locate the satellite.
•
Stowing Antenna
Antenna is being stowed.
•
Inclined Mode
System is in Inclined Search Mode.
•
Reading MDM Param
Modem configuration are read before the search routine commences.
•
EL Peaking
Adjusts Elevation angle positioning to acquire the best angle accuracy (to within 0.5
degree).
•
AZ Peaking
Adjusts Azimuth angle positioning to acquire the best angle accuracy (to within 0.5
degree).
•
AZ/PL Calibration (Internal, status not displayed)
Fine adjustments that are made on Azimuth or Polarization axis for optimal
measurements where adjusts and or corrections are applied.
•
Reading Compass
Compass heading is read when find satellite is initiated.
•
Locked
Satellite signal has been acquired and locked on.
•
Manual ACP on EL
Fine Pointing by adjusting the Elevation angle manually in small increments during the
Cross Polarization isolation measurement.
