C-COM Satellite Systems Inc.
iNetVu™ 7710 Controller User Manual
105
TX
Transmit Polarization set in the satellite modem, Hughes Net service only.
LNB 22 KHz Tone
The 22 KHz tone can be disabled or enabled for supporting modems.
DVB Type
Required on Hughes Ku (HX Modem) the DVB-S type of the modem to be set to allow the
modem to stay online after the TX enable command has been sent from the controller. If the
DVB-S type on the modem is not set to the same as the controller (default used is DVB-S1) the
communication will be lost after modem goes online.
VA_SB2 Modem (Auto-Acquire) Options:
This service has the standard configurable options that would exist for any modem
configuration. Supports both standard TRIA as well as the new ETRIA.
Tooway Modem Options:
Auto-select Beam Color
This option is only available with the Tooway modem service. Select the Auto-select Beam
Color to have the system automatically lock on the Beam Color by referring to the built-in lookup
tables and GPS location.
Update look-up Table
The Tooway Look-up Table must be uploaded to the Controller via the Application software this
allows the beam table to be saved and used within the controller; this must be performed before
it can be used directly from the Controller LCD. This process is only required once if no changes
are made to the Beam Colors which than will require another Table Upload.
To enable this feature from the 7710 front panel, do the following:
a. Put 7710 Controller into S File Downloading mode (same mode as updating
Firmware).
b. Click on Update Look-up Table button.
c. Monitor status on bottom left hand.
