C-COM Satellite Systems Inc.
iNetVu™ 7710 Controller User Manual
58
7.11.1.
E&A&P
Fig. 46:
Test/Demo EL, AZ, PL Configuration
1
– Elevation Range
Allows the user to set the start and stop angle of the elevation axis, as well as set the specific
speed for elevation movement. (E +20:70:7
–implies from angle 20 to 70 at speed 7).
2
– Polarization Range
Allows the user to set the start and stop angle of the polarization axis, as well as set the specific
speed for polarization movement. (P -60:60:7
–implies from angle -60 to 60 at speed 7).
3
– Azimuth Range
Allows the user to set the start and stop angle of the azimuth axis, as well as set the specific
speed for azimuth movement. (A -180:180:7
–implies from angle -180 to 180 at speed 7) Fly-
away systems will have a different range.
4
– Axis Selection and looping option
The first two characters refer to the axis selection (i.e.
DD
: D).
DD
Disable Test for all axes.
EL
Perform test on the Elevation axis only.
AZ
Perform test on the Azimuth axis only.
PL
Perform test on the Polarization axis only.
AA
Perform tests on all the axes.
The third character refers to the looping intervals between tests (i.e. DD:
D or
DD:
1
).
D
Disables looping, test will only be performed once.
1
Infinitely loops with NO_DELAY interval between tests.
2
Infinitely loops with 10-seconds interval between tests.
3
Infinitely loops with 30-seconds interval between tests.
6
Infinitely loops with 1min interval between tests.
9
Infinitely loops with 3min interval between tests.
E +20:70:7 P-60: 60:7
A-180: 180:7 DD: D TST
1
2
3
4
5
