C-COM Satellite Systems Inc.
iNetVu™ 7710 Controller User Manual
18
6. Installation
The iNetVu
®
7710 Controllers are shipped pre-configured and calibrated with the iNetVu
®
Mobile Platform (equipped with the 7720 Remote Drive Module) and service which you plan to
use. Only configuration of the Satellite Modem / VSAT Communication parameters and the
satellite you wish to find is required.
6.1.
Rack Installation
The iNetVu
®
7710 Controllers include attachable “ears” which make the iNetVu
®
7710
Controllers configurable for rack-mounted installation.
If you are installing the iNetVu
®
7710 Controller onto a rack, ensure that you use supporting rails
or a shelf to support the weight of the iNetVu
®
7710 Controller, and use the provided
“ears/brackets” to fasten the unit to the rack face.
6.2.
iNetVu
®
Software
– Software and USB Driver Installation
It is recommended that the previous software be removed before installing latest software
version if upgrading. See minimum recommended pc requirements for most favorable working
system.
Note: Do not connect USB cable between controller and computer/laptop until the
software with all the required drivers have been successfully installed. This will ensure
the proper drivers are used once the USB connection is established.
1.
If you are installing from the USB flash drive or have downloaded from the C-COM FTP,
run the
iNetVu7710Setup.exe
file.
