C-COM Satellite Systems Inc.
iNetVu™ 7710 Controller User Manual
94
Test Compass
Positions Antenna to the set Elevation angle and updates compass heading
by moving to the set End Angle values entered by the user on all three axis.
Only end angles are required when testing or validating compass.
Stop Test
Halts all test/demo sequences.
Test Elevation
Moves dish to the values set in the Start Angle and End/Demo Angle fields.
Test Azimuth
Moves dish to the values set in the Start Angle and End/Demo Angle fields
Test Polarization
Rotates dish to the values set in the Start Angle and End/Demo Angle fields
Modem Test (Command)
The user may enter certain modem commands and click send. The 7710 Controller will then
read the response from the modem in the text area below the command line. Currently the
commands supported are for iDirect services only:
•
laninfo
•
tx power
•
tx freq
•
tx symrate
•
tx cw
•
rx power
•
rx freq
•
rx symrate
•
latlon
