C-COM Satellite Systems Inc.
iNetVu™ 7710 Controller User Manual
50
7.10.6.
GP
Allows for the Configuration of the GPS parameters and settings.
Fig. 38:
GPS Configuration
1
– GPS Status Configuration
N
Use Coordinates from GPS Antenna
O
Override GPS and use the coordinates entered (2) and (3). Enables the GPS coordinates
to be manually overridden. This should only be enabled if the GPS Antenna is
malfunctioning and the user has a reliable, alternate source for coordinates.
Indicates a situation or practice that might result in
property or equipment damage.
Note 1:
If you have overridden the GPS coordinates, they will have to be
updated if the Mobile Platform has moved to a new location since the overridden
values will no longer be accurate.
Note 2:
Overriding the GPS will affect movement protection on all mobile
platforms preventing them from automatically stowing if vehicle movement and/or
severe motion are detected. If the vehicle drives off with the platform deployed, it
will not stow as it should because the GPS is overridden. Moving vehicle GPS
speed and location must reach min 5km/h and or Elevation angle changes by 2
or more degrees for the movement protection feature to trigger!
2
– GPS Latitude Coordinate
3
– GPS Longitude Coordinate
7.10.7.
MT
Fig. 39:
Platform Information
G :O 45.41N 75.62W
1
2
3
A0756A
—2.X--3103
1
3
2
