C-COM Satellite Systems Inc.
iNetVu™ 7710 Controller User Manual
60
1
– Elevation Movement
User-defined target elevation angle offset for compass reading
2
– Polarization Movement
User-defined target polarization angle for compass reading
3
– Azimuth Movement
User-defined target azimuth angle for compass reading
4
– Check Compass (at specified target point)
Tests the compass’ heading and accuracy at the user defined Elevation, Polarization, and Azimuth
angles, by rotating the antenna at 90
intervals and comparing the compass readings with the
actual antenna’s movement. This function is mainly used for testing purposes. Ensure proper
orientation (front of vehicle is point north). Popup (see below) displayed in Software application.
Antenna will move to the target Elevation, Polarization, and Azimuth for reading the compass
heading such that the user can determine if the compass reading is accurate at that point.
5
– Manual Compass Calibration
Will allow user to deploy and calibrate the compass manually at 3 points (0, 90 and 180), all three
angles must be calibrated for the Manual Calibration process to successfully calibrate the
compass.
7.11.4.
A_ACP
Initiates an automatic cross-pol test.
7.11.5.
M_ACP
Initiates a Manual cross-pol test.
7.11.6.
S_ACP
Stops the cross-pol testing instantly.
