C-COM Satellite Systems Inc.
iNetVu™ 7710 Controller User Manual
79
•
Motion Monitoring
Detects the Motion and triggers the Motion Detection alert when environmental motion is
detected.
•
Manual ACP on AZ
Fine Pointing by adjusting the Azimuth angle manually in small increments during the
Cross Polarization isolation measurement.
•
Manual ACP on PL
Fine Pointing by adjusting the Polarizer angle manually in small increments during the
Cross Polarization isolation measurement.
•
Enable Modem
This status appears during the enabling of the modem transmitter and right before the
Modem TX Enabled status is displayed.
•
Uploading
Log File downloading status, Note: System status is overridden by history system status.
•
System Initialization
Indicates communication between 7720 Remote Drive Module and 7710 Controller is not
established.
Satellite Modem Communication Status
Indicates the Transmitter status and displays any issues in communication with the Satellite
Modem
•
Modem TX Enabled
Indicates that the transmitter has been enabled.
•
Operation Mode
Indicates that the TRIA has been enabled on SurfBeam2.
•
Modem TX Disabled
Indicates that the transmitter has not been enabled.
•
No Modem Communication
The controller is trying to establish communication with the modem and or
No power is applied to the modem.
GPS Status
Displays condition of the GPS signal
•
GPS Normal
GPS signal is being received from the GPS Antenna.
•
GPS Failed
GPS signal is not being received from the GPS Antenna.
•
GPS Override
GPS coordinates have been manually overridden from the Maintenance menu.
Controller Status
Displays communication status between the PC and the iNetVu
®
Controller
•
Controller Normal
Indicates normal communication status between the Controller and the PC
•
Controller Failed
A failure in communication between the Controller and the PC has been detected.
