Buderus Logano G215 WS, Инструкция по установке и обслуживанию

Страница: 35 / 62

Boiler installation 8
Logano G215 WS - We reserve the right to make any changes due to technical modifications. 35
8 Boiler installation
This section details how to install your boiler correctly.
These details include:
– Flue gas connection
– Water connections
– Electrical connection
– Burner installation (if not fitted at the factory)
– Fuel connection
8.1 Flue gas connection
In different countries, different requirements apply to the
flue gas connection.
z
Create the flue gas connection in accordance with
the requirements applicable in your country.
8.1.1 Fitting the flue pipe sealing collar
We recommend that a flue pipe sealing collar
(accessory) is used to ensure the best seal.
z
Push the jubilee clips over the flue pipe.
z
Push the flue pipe as far as possible onto the flue
outlet.
z
Place the flue pipe sealing collar around the flue
pipe–flue outlet joint so that it overlaps on top.
z
Pull a jubilee clip onto the flue outlet and a second
clip onto the flue pipe.
z
Tighten the jubilee clips so that the flue pipe sealing
collar fits smooth and snug.
8.1.2 Fitting the flue gas temperature sensor (accessory)
z
Weld the connector into the flue pipe at a distance of
2 × flue pipe diameter (2 × Ø A) from the flue outlet.
z
Fit the flue gas temperature sensor (
Î
flue gas
temperature sensor documentation).
Fig. 50 Installing the flue pipe sealing collar (schematic)
1 Flue pipe
2 flue pipe sealing collar
3 Boiler flue outlet
4 Jubilee clips
1
4
2 3
Fig. 51 Fitting the flue gas temperature sensor (schematic)
1 Coupling
2 Flue gas temperature sensor
1
2